1 / 11
Anet AM8 BLV Gantry Adapter Hero Me Gen 7 Release 4 (HMG7.4) — image 1
1 / 11

Anet AM8 BLV Gantry Adapter Hero Me Gen 7 Release 4 (HMG7.4)

Order a print of this model

We calculate the final price from your selected file. You review and accept it before payment.

Saved on this device.

Gantry Adapter for the Hero Me Gen 7 Release v4

Rating
0 / 5
Likes
0
Downloads
3
Makes
0
Views
37
Reviews
0

Updated at source:

Model information

License
Creative Commons — Attribution — Noncommercial — Share Alike

Parts Print List:

  • 1 × HMG7.4 Anet AM8 BLV MGN X Carriage Adapter.stl

  • 2 × HMG7.4 Anet AM8 BLV MGN X Carriage Plates.stl

  • 1 × HMG7.4 Anet AM8 BLV MGN X Carriage Brace.stl

For recommended printing orientation see photos.
Everything was designed for printing without supports.
Brim/skirt/raft might be necessary or recommended for 'HMG7.4 Anet AM8 BLV MGN X Carriage Brace.stl', I didn't needed it but use your own knowledge about your own printer.
Print settings as recommended by MediaMan3D for the Hero Me Gen7 Platform.


BOM:

  • 6 × M3 × 12 mm button head socket cap screws or Phillips pan head machine screws

  • 4 × M3 × 8 mm button head socket cap screws or Phillips pan head machine screws

  • 10 × M3 hex nuts


Instructions (See exploded view and my use case for example):

  1. Insert 6 hex nuts into the X Carriage Adapter.

  2. Take one of the X Carriage Plates and bolt it to the X Carriage Adapter using 3 M3 × 12 mm screws.

  3. Use a small drop of super glue to hold 4 hex nuts in place inside the hex recesses of the X Carriage Brace.

  4. Use 2 M3 × 8 mm screws and 2 hex nuts to fasten the X Carriage Brace to the X Carriage Adapter.

  5. Mount the partially assembled X Carriage onto the rest of the Hero Me Gen 7 assembly. The extruder must be assembled later.

  6. Mount the assembly onto the MGN12 carriage block by inserting it from the side.

  7. Mount the second X Carriage Plate from the back using 3 M3 × 12 mm screws and 2 M3 × 8 mm screws.

Tags