Counting matching models…
Welcome! The Fifne AM8T mic is a great budget option. I've been using mine for a while, and at the 60 USD price point with a boom arm, is a really good budget option. But one thing was wrong with it, no shock mount. The mic is connected…
Core XZ Anet AM8 Conversion: There is now revision 6 uploaded (see in the update section) This is a design to convert an anet a8 or other i3 cloes into a Core XZ printer. It is an upgrade on top of the AM8 upgrade (…
This was a HUGE project that took me a LONG time to design. I wanted the cleanest Anet AM8 conversion out there. No wires showing, all the electronics hidden, a rock solid frame, silent printing, and the cleanest looks you could imagine!…
Anet AM8 for Prusa Slicer (standard) This is a 3d model of the standard Anet AM8 build that can be loaded on PrusaSlicer or other slicers that support it. To use it on Prusaslicer, go on Printer settings tab, on Bed shape click “set”,…
I liked the Voron Clockwork Direct Drive System, so I made some changes to use it on my BLV AM8. The 12mm Belts and Pulleys can be bought from E3D Online. Print instructions Unassociated tags: Direct Drive, X Carriage Category: 3D Printer…
Simple case for PAM8610 amplifier. Tight fit around the board. Button size is 15x10mm. Photos show PLA draft print of 0.3mm with thin wall detection.
*UPDATE 31.12.25 → Now includes models for 12gauge Shells of the 3 major legnths. Be sure to choose the right variant for yourself. *UPDATE 02.03.26 → Added a blank front face for all variants. Now you can write on it as you please. A…
This design replaces the stock X carriage bracket of a Anet A8 / AM8. The backplate features a mounting pattern for a BIQU H2 V2.0 extruder / hotend, using 4 attachment screws. A second part features attachment points for a 5051 blower…
A slim profile case for Skr mini e3 with space for raspberry pi 3 and 2x mosfets for 2020 or 2040 extrusions. Please note that if you decide to use the raspberry pi, there won't be space to plug in the USB therefore the alternative is to…
Short stand for Microphone Fifine AM8, compatible with any 3/8'' tread
This is a remix of the amazing Bear Extruder for the Prusa machines. It was designed to fit the spacing that the Anet A8 and AM8 uses and their Z rods/screws. This remix uses the standard length X rods from the A8/AM8, but the spacing on…
I used Duramic PLA+ in black at .16 layer height, 4 walls, 7% infill.
BMG MK3 mod for AM8 Print belt test before any "x carriege" to choose the right one for you. Changed BL_touch body Uploaded wrong fan pancake holder. It's fixed now (pancake_DissEd = Good). Sorry, my bad. Belt holder in x carriege keeps…
This is a low profile stand for the Fifine AM8 microphone. The stand that comes with the microphone is very tall, this one is much shorter to fit in tight spaces.
I liked Prusa MK3S spool holder. I decided to inspire by it and designed my own for Anet AM8. It's for Aluminium t-profile 2040. Print instructions Category: 3D Printer Parts Print Settings Printer: Anet AM8 Rafts: No Supports: No…
This is an end cap for the AM8 frame. The primary purpose of this part is to keep debris out of the hole in the center of the extrusion. Press Fit. Print Settings Printer: Anet A8 Supports: No Resolution: 0.2mm Infill: 100% Notes: Shell…
Status: Finished! Working great! Status: 3-4-2019 Printing out all the necesarry parts, everything fit nicely! Waiting for the parts from china. Status 14-4-2019 Except for the filament sensor, everything arrived. Assembled the whole…
An enclosure for PAM8403-based tiny audio amplifier board that can be purchased from online stores like [Sainsmart] . There are two versions with or without vents. This STL model has been optimized for Hatchbox Wood PLA. For different…
Want to use your Airsoft APS-Shotgun on Outdoor fields, but your range is just too short? Have a lot of rest pieces of PLA-Rolls but you don't want to throw them away? Well, got I THE answer for you! High Performance Wads will increase…
Why use drag chains on your 3D printer? They reduce strain on the cables and especially the ends, increasing their lifetime. They also prevent the cables from snagging somewhere, or tangling - which can lead to failed prints. Overall,…
This is an ATX power supply mount for 2040 and 2020 extrusions. After converting my Anet A8 into an AM8 I needed a mount for the non standard power supply. All solutions I found were over designed and/or gigantic, idiotic (fans toward the…
NOTE: While this model works great, I recommend using my A8 Bear X Ends instead ( https://www.thingiverse.com/thing:3813648 ). They allow for the use of all the unmodified Bear Extruder parts. Bear Extruder X Carriage for Anet A8 or AM8…
its time for a Remix :) bom MK8 Drive screws optional: 4x cable connector Config for BLtouch Offset X: 0 Offset Y: +27.3 changelog 19.04.2020 final 20.04.2020 small update: xbelt 21.04.2020 add v2 and v3 of FanDuct Nozzle (v2 height…
!!! Updated Design and Print Settings !!! Use TPU (95A) for best performance. I also added a “ready to go” Print File for Prusa MK3 users. Dummy Shell Features: Hammer can be discharged safely. (Extended dryfire damages the hammer.) Helps…
I really liked the design of the EVA 3.0 printhead and I have modified it a little to make it work on the AM8 BLV, and to make it work with Sherpa Mini and E3D V6. It has a lot of heat insert, but some hex nut, so have get both. Website…
A box for AM8 printer to fit SKR 1.3 ans 1 mosfet.
UPDATE*** 12.08.2026 - Fixed wrong information - Corrected grammatical errors Okay my Boiz, that here is my Magnum Opus! As many of you know, I have a deep passion for Airsoft Shotguns and thus, our beloved APS-Shells. I really wanted to…
Holder bracket for the Fifine AM8 microphone to move closer to the mouth.
Whilst upgrading to a dual print, I opted for a single, extruder mount for my 2040 Rig. Found a Single Extruder Mount and Tinkered to make it Dual This turned out pretty neat Print instructions Material : PETG Temp (E/B) : 235 / 75…
AM8 led light bar remixed/inspired/based on https://www.prusaprinters.org/prints/3267-led-light-bar-prusa-i3-mk2mk3 F3d file with slightly parametrized bend angle, front and back length Fits 16x9mm aluminum profiles
I had an ANET AM8 frame, which is solid as a rock, and I wanted to re-use this and turn it into a Prusa Bear with the BearExxa axis (and extruder). See - https://github.com/gregsaun/prusa_i3_bear_upgrade and…
Case for SKR 1.3, two mosfets and stepper paralel modul. It can be mount to any alu extrusion profile.
Hello, i converted my Anet A8 to a AM8 ( https://www.thingiverse.com/thing:2263216 ) But i did not like the Endstops from the beginning. so i switched to Makerbot Design Endstops. With thumbscrews to adjust the Bed there was no way to…
A simple mount to place the stock A8 extruder motor on the upper corner of the AM8 2040 extrusion frame. 2018-12-14: Added a version with a notch to make disconnecting the bowden connector easier for those of us with stubby fingers Print…
A tool to help you seat paper-wads of your APS-Shells and compress BB-loads. Especially when you are loading many Hulls regulary. Your hands will thank you. Its a comfortable alternative to using the still legendary Load Tool from XE.
Turn your Airsoft 40mm into a actually usable Airsoft Shotgun by using APS CO2 Shells. Also carry ten times the ammo for the same weight. Just click it in and you are ready to go…… …..well you might need to modify and extend the valve…
Sunlu Dryer Holder for AM8 or Prusa Bear (2040 extrusions). Modified version of the filament dryer holder to be installed on 2040 extrusions, the holder snaps in place, no need for screws or t-nuts or anything as such, the spacers are…
Update (5/14/2019): v4 uploaded and IT WORKS. Now I just need to redesign the cover, as it does not fit. The Solidworks files have not been updated, they have been converted and mutilated several times now. Gross. Update (5/10/2019):…
A remix of oirginal prusa for Titan Aero Prusa i3 MK2 Mk3 Anet A8 AM8 Toolson Wilson inkl BLTouch Mount E3d Volcano Print instructions Category: 3D Printer Parts
Use it, Spread it, Remix it! This 2020 Attachment adds 75mm tall legs. These legs allow me to get under my printer to keep my work space clean. Print with legs upside down. Print Settings Initial Layer Height: 0.15mm Layer Height: 0.2mm…
Welcome! The Fifne AM8PROT mic is a great budget option. I've been using mine for a while, and at the 70 USD price point with a boom arm, it's a really good budget option. But one thing was wrong with it: no shock mount. The mic is…
I really liked the design of the EVA 3.0 printhead and I have modified it a little to make it work on the AM8 BLV. The parts are I have changed are the parts for the Orbiter 2.0 extruder and Pheatus Rapido HF hotend. Website of the AM8…
After doing the awesome upgrade to our printers with this https://www.thingiverse.com/thing:2263216 My buddy Dave and I made a change to the Y rod holders... Print Settings Printer: AM8 Rafts: No Supports: No Resolution: 0.2 mm Infill:…
These are the upgrade Parts needed to move from a 6mm GT2 Belt to the 12mm Gates belt that is sold by E3D Online. They also sell the 12mm pulleys. This forms part of my Grasshopper V1 Carriage Upgrade. My Grasshopper Carriage is published…
This simple gantry leveling tool fits nicely in the groove of the aluminum extrusion, as shown in the photos. Easily level your X gantry by lowering the Z axis on either side until the X rod touches the tool.
This is a remix of the case from Leo_N but i made it completly from scatch... (cause editing a stl file is a pain in the a..) It's designed to be attached to the side of the AM8 frame. I added 3 versions of the case (with a SD card…
Update 28.12.2021: added a knob for the volume potentiometer This is a small case for a PAM8403 Amplifier. The small amplifier is ideal for PC speakers since it can be powered by USB cable. You need four M3 countersink screws to close the…
This is a case for a standard power supply, which can be attached to an AM8 ( https://www.thingiverse.com/thing:2263216 ) aluminium 2020 extrusion frame. The larger part covers the bottom screw terminal of the PSU, the second parts fixes…
ANET A8 ANET AM8 Y BELT HOLDER Category: 3D Printer Parts
Fifine am8 potentiometer small, I didn't like that these potentiometers were sticking out too much.
Got a new Einsy Board and working on making everything work with my AM8. Print instructions Category: 3D Printer Parts
how it's working: Solves the problem of z axis calibration. You have to disconnect one of the z-axis motors. Belt tensioner & reduction in the link: https://www.thingiverse.com/thing:3008207 https://www.thingiverse.com/thing:3009109…
***UPDATE 15.04.26 - Included Models with wider holes for the nail to make fitment easier. A small tool to help you to remove the bottom part of APS-Shells.
Bracket for AW3821DW, shown on my Fifine AM8, but should work for other microphones.
!!! Updated Print Settings available !!! Use TPU (95A) for best performance. I also added a “ready to go” Print File for Prusa MK3 users. Empty Chamber Flag (EC-Flag) Features: Hammer can be discharged safely. (Extended dryfire damages…
Old, but someone may find it useful. Anet A8 Extruder Fan Access, No Magnets. Based on Puddlefist & musta ideas. As I had no magnets I made this , It also has side vents to push air down the side of the stepper motor helps a lot to keep…
After upgrading my Anet to an AM8 frame, I tried many different knob designs. Some would be a bit small, providing very little leverage for the awkward space available below the print bed. Others would be wider, and worked great until…
A little TPU plug to help you get a little bit more power out of your APS CAM870 (better with longer barrels). Easy to install. Use TPU (95A) Print with 100% infill.
Use it, Spread it, Remix it! This 2020 Attachment holds a Micro to SD Extension. Dimensions of extension: 2 x 0.4 x 0.4 inches (50.8 x 10.16 x 10.16mm) Amazon Link for Adapter in US The adapter sits halfway into the part to allow for the…
I've been using a remix of the original design on my blv AM8, but I found its single mounting point just a little too flimsy. The creator of that remix did not provide any CAD files, so I remixed the original. Here are the changes: Added…
A short grip for your APS CAM870 A short grip for your APS CAM870. There are 2 versions. Both are available with and without threaded inserts. “Integrated Loop” - Allowes you to use a simple fabric sling adapter. “APS Sling Loop” - Uses…
I really liked this extruder mount for titan aero https://www.thingiverse.com/thing:2301102 , and wanted an X-carriage for my AM8 BLV. Category: 3D Printer Extruders
This is an IDEX version of the AM8 which includes many custom parts, I found on thinigverse. If I forgot to mention someone, please let me know. It is fitted with 2 Bondtex BMG direct drive extruders mounted on a quick fit mount for easy…
E3D V6 hotend carriage for Anet AM8 MGN12 This is a modified version of the hotend carrige for E3D V6 from BLV . It is using M4 screws to clamp the hotend to the carriage, instead of M3. The design is also using ab modified way to connect…
A Voronoi-pattern box for RAMPS and two MOSFETs, mountable on an AM8 or similar printer using 2040 extrusions. The Arduino and MOSFETS can be mounted using M3x10 screws. A structure in the top-right corner can be used for cable…
My custom rig is kinda a mash up of the BLV Mod, but I did not use linear rails on the Y axis, so the Y motor mount in that project is too tall. IDK if this really a “remix” I did design it from scratch, but I tried to keep the look of…
Introducing the "Advanced Shock Mount For Fifine AM8T". This model is based on The Printing Pilot's original design with the addition of free movement. I needed to change the mount due to my partner having issues while streaming (Here is…
This is a document dump of everything that went into converting my (already heavily-modified) Anet A8 to (an improved version of) an AM8. I retained the A8 upgrades that made sense to keep, while taking the opportunity to improve on the…
Belt Tensioner Y This is a remix of the Y belt tensioner form BLV . It is a improved version of my first design Change log V1.1 shortened Y-Tensioner included .step-files Parts Printed parts Y_Tensioner_01_01 Y_TensionerBaseBlock Hardware…
This two part case can be fixed to the left side of an AM8 ( https://www.thingiverse.com/thing:2263216 ) aluminium 2020 extrusion frame. Special care was taken to provide enough space for an USB cable which connect the SKR 2 and the…
* This was primarily designed to fit this Titan Aero mount or my remix to the brilliant BLV mgn12 AM8 mod. * Travel limits are about X = -9 Y = -22 for Volcano, X= -6, Y= -27 for v6. Update (12/4/2019): I've been using this mount for a…
This is remix of 20x40 EXT for 5mm Nut ..( What i found in my region without waiting shipping from china ) (:- I waiting for the part of aluminium for my Upgrade My ANET 8 to AM8 .. and i will modify a lot of things .. But I share My…
A simple follower design. Use it as a spare part, or to change the color of the follower to be more visible in use. The model is already oriented for optimal printing, resist your urge to turn it around.
Update V2: As asked, I added another version of the Case to fit the mounting screws of an MKS_Gen L board. (couldn't test it as I don't own one...) Update V2: Now added the Cover for the Mosfets. Hope everything fits well. If not, let me…
I've had trouble with my last Y rod holder - it split and was very large and cumbersome. Typically, I would've gotten something off Printables.com, but I couldn't find any that supported full travel for the plate. So, I designed this…
Original E3D Hemera mount adapted to Hemera XS Revo. Printing Without support Prefere PETG for heat resistance property. Assembly Attach Hemera to* Front plate * (3x M3 screws). In addition, you can print 3x* Screw spacers * to be able to…
These two parts can be fixed to the top side of an AM8 ( https://www.thingiverse.com/thing:2263216 ) aluminium 2020 extrusion frame. The mount for the filamant sensor accepts two M3 nuts from below and fits any sensor with a 20 mm hole…
This is the ultimate electronics box for AM8. Don't look no further! This is electronics box for AM8 / BLV / other similar builds similar to AM8. Double check your printer if it has the extrusions laid out in the same way as AM8. Pimped…
XCR3D 2IN1-S1 Anet A8 - AM8 duel hot end Mount Category: 3D Printing
November 9, 2018 Major upgrade to this project as I'm using this for the development of my custom Prusa i3 type 3D printer (like AM8) based on 2040 Aluminium extrusion profiles and a 200x300 heated bed. All parts are printed. Please use…
Enhance your Modix V3 or V4 with our custom adapter plate, designed for seamless integration of the MantaM8P board with a CB1/CM4 module. To ensure optimal compatibility and performance, replace the existing 25mm standoffs with 4-7…
A shell holder that can hold 5 shells with friction pads, that are included into the design of the model. Parts List: 1 Set - APS Scope Mount Pins 5x - M3 x 10mm - Countersunk Flat Head Bolt For the best mix of robustness and flexibility,…
I'm having difficulty aligning my lead screws, so I remixed the original Z motor mounts to be able to slide the motors back and forth for alignment. Also removed the lettering on the side, because that is my biggest complaint with the BLV…
This is a silly little bracket for hanging a feeler gauge on. Uses a single M5 bolt and T-Nut. Print instructions Category: 3D Printer Accessories Print Settings Rafts: No Supports: Yes Resolution: 0.2mm Infill: 40% Notes: I printed it…
I started out wanting to use the right-side chain at https://www.thingiverse.com/thing:2745156 , but there were several points of interference between it and my AM8 build (might've been a function of the right-angle brackets included with…
This is a universal endstop for the MakerBot Endstops typically used with a Ramps 1.4 upgrade. This endstop mount can be used for all three axis, x, y, and z. Can be printed with minimal support. Category: 3D Printing
Rubber Feet Anet AM8 This think is an adapter for rubber feet for an Anet AM8. Parts Printed parts Winkel_unten_01_01 Hardware ISO 4762 - M5 x 10 (4x) ISO 4762 - M4 x 20 (1x) ISO 4032 - M4 Addional Parts Rubber feet 20 x 9 mm Mounting…
Piccole manopole per la regolazione del livellamento bed AM8 Category: 3D Printer Accessories
45° mounting screwed shaft with insert for @MrPresident AM8 Shock Mount
I iterated the model to fit perfectly on the hexagonal type sodastream adapter and also for the CAM870 shell containers in order to make the filling of them much easier. Also, a 3mm hole was added if the fitment wasn't perfect, a M3 screw…
Enclosure for BIGTREETECH BTT SKR 3 EZ Control Board for use on aluminium extrusion frames such as AM8. There is a version that uses M3 threaded inserts to attach the lid and a version that uses modelled threads. Category: 3D Printer Parts
A bracket to mount an ATX PSU to a an AM8 or similar printer using 2040 extrusions. Attach it with up to 8 M5 screws and T-slot nuts. Because the PSU will be offset from the vertical extrusion to which it is mounted (in order to keep the…
Expereanced a clearance problem with the x-Axis on AM8. Just added 20mm. Should fit now. Print Settings Printer: AM8 Rafts: Doesn't Matter Supports: Doesn't Matter Infill: 50% Category: 3D Printer Parts
Update 5/31/2019: Printed and tested. It works fine. Added v2 of the purge bucket. I moved it in closer to the mount by halfway merging the legs, and also made them pretty with some hawt fillets. I have such little space between the…
Bottom supports to use with the original model
Remix of lennertvdkort's Y-axis tensioner for the AM8. It moves the mounting flange to the front and adds a cutout for the idler wheel. This allows the for the use of shorter screws and lets the idler sit closer to the frame gaining about…
On a cartesian printer with 2 independent leadscrews for z, it happens, that the X- axis tilts a little and this induces z-wobbling artifacts. The Heatbeds are often mounted on springs / silicone pads etc. to get the opportunity to level…
You love using 4.5mm BBs in your Airsoft APS Shotgun? But you dislike counting the very specific amount of BBs you have to use? Well, not anymore you don't! I have designed this Loading Tool to speed up that process. It will count the…
This is an enclosure for the Duet 2 Maestro for the (anet) AM8 frame. It mounts to a 2040 extrusion so should be compatible for plenty of other printers. The Duet mounting dimensions were used to create this…
I have remixed the part from Am8 cable chain hotbed mount v 1.1 by hoya7792 , thanks. I remixed to enable support for the power connector to the bed. ORIGINAL POST DATE 29-MAR-2019 Print Settings Printer Brand: Anet Printer: A8 Rafts: No…
