1 / 1
AM8 Filament Sensor Mount & Guide Ring
Order a print of this model
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
These two parts can be fixed to the top side of an AM8 aluminium 2020 extrusion frame.
- Rating
- 5 / 5
- Likes
- 6
- Downloads
- 24
- Makes
- 1
- Views
- 224
- Reviews
- 1
Updated at source:
Model information
- Source
- Printables
- Category
- Other Printer Parts & Upgrades
- License
- Creative Commons — Attribution
These two parts can be fixed to the top side of an AM8 (https://www.thingiverse.com/thing:2263216) aluminium 2020 extrusion frame.
The mount for the filamant sensor accepts two M3 nuts from below and fits any sensor with a 20 mm hole distance, e.g. https://www.amazon.de/gp/product/B07FSXFPLD .
Nuts and bolts needed:
- 2* M3 x ~20 bolt
- 2* M3 nut
- 3* M5 x ~8mm bolt
- 3* M5 2020 slot nut
- Some washers if you use longer bolts
Print Settings
Rafts: No
Supports: No
Resolution: 0.2mm
Infill: ≥15%
Filament: Any PLA / PETG
Assembly
Insert two M3 nuts into the bottom hexagonal hole of the sensor mount.
Category: 3D Printer Parts