Core One L hepa-carbon filtration unit.
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Magnetic mounted filter box utilizing vacuum hepa filters, carbon pellets, and two 40mm 24 volt fans.
- Ocena
- 0 / 5
- Polubienia
- 1
- Pobrania
- 6
- Wydruki
- 0
- Wyświetlenia
- 84
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Prusa Parts & Upgrades
- Licencja
- Creative Commons — Public Domain
Parts needed:
Mini vacuum hepa filters https://www.amazon.com/dp/B0FWGYBH91?ref=ppx_yo2ov_dt_b_fed_asin_title
Neutral PH carbon media
Two 40mm 24 volt fans.
Two 10x2 magnets.
Wire, shrink tube, solder
Directions:
Print both parts out of PETG or a material with greater temperature resistance (asa/abs/etc)
Snap fans in.
Guide fan wires through the hole for routing, I ended up using a piece of solid core bell wire and tape as a cable snake.
Terminate wires accordingly. I used a Noctua extension cable for the connectors so the filter box can be disconnected for service.
Fill media shelf with activated carbon, I ended up overloading it a bit and shook some of the pellets up into the hepa filters.
Glue in two 10x2mm magnets.
Install in back left corner.