Adafruit 64x32 RGB LED Matrix Enclosure
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
2-part enclosure for the 64x32 LED Matrix board (4mm pitch), Matrix Portal M4 driver, and an acrylic diffuser sheet.
- Ocena
- 5 / 5
- Polubienia
- 11
- Pobrania
- 89
- Wydruki
- 1
- Wyświetlenia
- 617
- Oceny
- 1
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Electronics
- Licencja
- Open Community License v1
This is a 2-part interlocking model designed to house the following components:
Adafruit Matrix Portal - CircuitPython Powered Internet Display
Black LED Diffusion Acrylic Panel 12" x 12" - 0.1" / 2.6mm thick
The acrylic panel will need to be cut down to (roughly) 138mm x 266mm to slide into the grooves in the front of the enclosure.
I used M3x18 hex socket cap head screws to fasten the enclosure to the LED panel. The diamond holes in the back can be used to hang the enclosure on the wall in any orientation.
The FreeCAD file is fully parametric, so you should be able to easily change the variables to adapt this for other screws, drivers, and acrylic/LED panels:
