Adafruit 64x32 RGB LED Matrix Enclosure
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
2-part enclosure for the 64x32 LED Matrix board (4mm pitch), Matrix Portal M4 driver, and an acrylic diffuser sheet.
- Rating
- 5 / 5
- Likes
- 11
- Downloads
- 91
- Makes
- 1
- Views
- 639
- Reviews
- 1
Updated at source:
Model information
- Source
- Printables
- Category
- Electronics
- License
- Open Community License v1
This is a 2-part interlocking model designed to house the following components:
Adafruit Matrix Portal - CircuitPython Powered Internet Display
Black LED Diffusion Acrylic Panel 12" x 12" - 0.1" / 2.6mm thick
The acrylic panel will need to be cut down to (roughly) 138mm x 266mm to slide into the grooves in the front of the enclosure.
I used M3x18 hex socket cap head screws to fasten the enclosure to the LED panel. The diamond holes in the back can be used to hang the enclosure on the wall in any orientation.
The FreeCAD file is fully parametric, so you should be able to easily change the variables to adapt this for other screws, drivers, and acrylic/LED panels:
