365 models
A sensor cover for the Adafruit Stemma Soil Sensor: https://www.adafruit.com/product/4026 Snaps Together nicely no glue needed. I print in PETg for outdoor durability. Logo on top (for those of you wondering) is for Team 4160 for which I…
A simple cover for the Adafruit Trinkey QT2040. For making a DIY USB Nova: usbnova.com But I also included a version of the case without the NOVA text printed on it, so you can use it for any project. You also need 4x M2.5 4mm screws to…
If you want to use your Adafruit feather in any sort of automation setting you might want to mount it on a DIN rail. The standard DIN rail mounts don't really have good mounting locations for the Adafruit feather board. This print…
I remixed the original case and thickened it enough to allow for the fan to be mounted inside. I also added a ribbon cable tab below the Pi's USB connections. With the added thickness, I was able to pull the ribbon cable out vertically…
This is a modified version of the “roller plate” 3D-printed part for the Adafruit Heat Set Insert Rig (https://learn.adafruit.com/heat-set-rig). The BOM for the rig calls for “3x 625Z ball bearings with wheels” from Amazon (…
Just a simple proetctive case for Adafruit's PN532 Breakout v1.6 . Includes slots in the base for easy storage of 25mm round NFC tags and 54mm wide NFC cards between RFID hack sessions.
Low cost (0.10 $US) Enclosure for Adafruit VCNL4040 Proximity and Lux Sensor to allow for handling, use and mounting of the sensor.
adafruits voltage regulator/filter PCB enclosure with 4 pin Connector fitted Header, Vertical, 4 Way - Jst (japan Solderless Terminals) | CPC Connector Housing, 4 Way - Jst (japan Solderless Terminals) | CPC Crimp Terminal, XH, 28-22AWG -…
Overview For a video tour of this tower setup, please visit this reddit post . In this video I explain how this quick-release system works along with some of the other upgrades that I have made for my Prusa i3MK3S+ with MMU3! (: The main…
I didn't find a mount for an Adafruit ADXL for the stealthburner which has wider holes so I created this one. You will need 2 M3x60 screws for the mount and 2 M2x8 for the ADXL itself and 2 M2 nuts. I hope it's useful for someone else ;)
Case for Small RP2040 Boards This is a case for the small RP2040 boards such as the Adafruit QT PY RP2040 or the Seeed XIAO RP2040. These small boards based on the Raspberry Pi RP2040 microcontroller. They have a USB interface and are…
Added text/symbols for Power / HDMI / ON as mine is at floor level so awkward to feel for small ports. Added slots for blower fan to vent out end of top case Chamfered SD card slot for larger fingers + thumbs Increased Extrude depth of…
Update: Added 3 versions - One with a hole for the STEMMA port, One with a hole for the STEMMA and Reset, and a last one that has space for a Pimoroni trackball. This is a form fitting case I designed for the Adafruit Macropad. Its…
This is a snap-fit case for the Adafruit 1.8 Color TFT LCD Display with MicroSD Card Breakout, ST7735R. This case is designed to be snap-fit together, not requiring any screws. Please check to see if this fits your display before printing…
This is a case for the raspberry pi 4 with an adafruit 3.5 tft screen. In the bottom of the case, you can use a noctuna fan NF-A4x10 5V. I used a 5V fan, so I can use the voltage of the USB port. The bottom and top is clicking, no screws…
A case for the Adafruit ESP32-S2 Reverse TFT Feather. Uses four to six m2x10 screws. https://www.adafruit.com/product/5345 Also included a battery case. https://www.adafruit.com/product/3898 I've updated both back plates to have better…
A bracket to allow the Adafruit ADXL345 to mount to the mini-afterburner in order to do pressure a advance. This designs uses m2 nuts and bolts to secure the Adafruit ADXL345 board to the bracket. and you'll need m3x40 bolts in to mount…
64x64 LED Matrix Grid If you're printing yourself don't use this model!: This is is a really really slow path to printing these since slicers aren't optimized for grids like this. A better option is: Create a 192x192x6mm solid box (or…
YouTube: https://www.youtube.com/watch?v=jy7a-z19UEQ NEW UPDATE April 8, 2016 – Added new parts for Adafruit 2.4" TFT Feather Wing This is our 3D printed case for the Adafruit Feather. It’s for anyone looking to put their project in a…
This is a small case for all 0.7 x 1 inch adafruit boards. The case is very delicate, please print with high details. The lid is not designed to be constantly be taken apart, the clips will wear off very fast. The board fits snug inside…
3D printable enclosure for the Adafruit Macropad PCB, inspired by the Nuphy Halo 96 keyboard. Needed: 4x M3x8 screws Adafruit Macropad Print: Print all 3 parts facing down (as shown on pic), only the PCB bracket need support Assembly:…
I've printed a custom fan duct for my Ender 3 V2 and I didn't want to re-print everything just to mount the ADXL onto it. Instead I got highly inspired by this drag chain mount. I designed my own based on this simply because I liked the…
I can't find any decent enclosure for Adafruit 3.5 PiTft with Pi 3B. So, I decided to make one. To display MagicMirror stuff like weather, news feed, upcoming calendar events.. etc on my desk. You can find more information about…
A cabinet enclosure for 64x64 LED matrix (3mm pitch) with Adafruit controller. The enclosure is suitable for wall mounting. PLA-ST & organic support.
* Thanks for the original designers of both models.
This print houses a single Adafruit QT PY board with USBC connector. The top snaps shut and has two button cutouts to allow you to press the reset / PIN9 button. It has a small slit in the back for cables - I use it to wire in external…
These cases are compatible with the following Feather boards: Adafruit Feather HUZZAH with ESP8266 WiFi: https://www.adafruit.com/product/2821 Adafruit HUZZAH32 – ESP32 Feather Board: https://www.adafruit.com/product/3405 Feather ESP8266…
This is a remix of the NVIDIA Jetson Orin Nano Developer's Kit Case. Modified it to work with the Adafruit Can PAL (CAN FD), and created a honeycombed bottom to provide airflow for the M.2 SSD and the rest of the Jetson's underside…
This is pretty much the same as the original, just easier to print and with a modified soldering iron clamp to fit the [Sremtch…
Adafruit's Circuit Playground Chess Get ready to play with the Adafruit Chess set! It’s entirely 3D printed and features players from Circuit Playground. In this project we’re using metal filament to 3D print the chess peices. This…
Needed a way to attach my Sequre SQ-A110 to the Adafruit heat insert press, so I made these brackets for it. One is intended if you want to keep it on, and just screws in place. (use threaded inserts on the back piece of both versions)…
This case for the Adafruit MacroPad is a snap fit enclosure and requires no additional hardware. Layer height 0.2 Should be sliced with “Detect Thin Walls” so the tips of the snap tabs do not make gaps in the side walls. If you are using…
I've created a small and simple case for the Adafruit BME688 sensor board for use with a Qwiic-Connector (no cut-out for the pins). I've printed it with Prusament PETG, not sure if other filaments will fit as PETG tends to shrink a bit.…
This enclosure was built to house a Sensirion SPS30 (particulate matter sensor) and an Adafruit BME280 (temperature, humidity and barometric pressure sensor) for an outdoor weather station. The goal was to have an enclosure that could be…
This is a simple snap case for the Adafruit OLED Graphic Display (SSD1306) (.96") 128x64 character OLED display or any similar .96 display. The design is meant to be small/compact and snap closed. Only the standoffs are exposed. The case…
Wall mounts for the Adafruit RGB Matrix Portal Series. 4mm (tested) 5mm (tested) 6mm (untested) Print instructions Print with wall side down, 0.2mm layer height on Prusa MK3S with 0.4mm nozzle works well.
This is a simple casing for the "Adafruit FT232H IO" board. The SCAD files can be downloaded here https://github.com/andimoto/case\_adafruit\_ft232h Assembling the case with 2mm or 2.5mm screws. Print instructions Category: Electronics…
Created a snap fit case for adafruit HDMI touch screen monitor. I wanted a case without having to install hardware. Printed supports on the notches in the case. https://www.adafruit.com/product/2260
(Will eventually upload a V2 that moves the iron up in the mount, that will reduce the leverage caused by the long soldering iron tip and reducle wobble.) You'll need two M3 (i used m3x5, of the type thats ~4mm in diameter) heat set…
This is an enclosure for an Arduino project with an Adafruit Motor Shield V2 . I did print them roughly on a FDM printer, but the rods would render much better in resin. The pins made accessible on the top are 5V, GND, A0, for a pulse…
I needed a way to hit a key combination on my computer while not at my computer, so the Adafruit NeoKey Trinkey was perfect for that application. However, I needed to be able to mount the key, preferably with the PCB not exposed. So I…
A simple 3d printed box used for housing an Adafruit Ultimate GPS breakout board v3 with usb https://www.adafruit.com/product/4279
I initially printed the parts for this press while I was waiting for the hardware to show up. When it did, I discovered that the threaded inserts I had bought were a smaller OD than the parts were designed for, and they would drop right…
Here is on request my lightsaber that I made with light and sound effects based on the original adafruit project. not being perfect, I leave with the Fusion 360 creation files which will allow the best of you to modify it, to improve it.…
I needed a sensor mount for my Enclosure Ambient Control project. I had a few requirements : It needed to sit close to the controller PCB so wiring is easy. It needed to have good air circulation It needed to be ridged enough for…
A quick 3D mock-up of Adafruit's Skinny Wheel for TT DC Gearbox Motors. Just in case you would like to print one for your purposes or make any changes to the hub that you may need. I printed the hub from ABS and the tire from TPU.…
UPDATE Added flat version for 3D printing flat on the bed. A fidget spinner is a simple and basic handheld toy meant for mindless fidgeting. These toys are one of those "I don't get it" things, until you play with one. Fidgeting is…
https://youtu.be/i-coZnJzuD4 Guide: https://learn.adafruit.com/pyportal-alarm-clock Fusion 360 Share Link: https://a360.co/2TYCIyy In this project we’re building an IoT Alarm Clock using Adafruit’s PyPortal. This displays the time and…
This is a remixed version of Q's ADXL345 mount. I modified their version to fit the Adafruit ADXL343 which has M2.5 holes instead of M2 holes. Like Q's version, you have to replace 2 of the M3x25 bolts with M3x40 bolts.
This is a stand and rotary cover for the Adafruit MACROPAD RP2040 ( https://www.adafruit.com/product/5100 ) or ( https://www.adafruit.com/product/5128 ). This is an easy print with less material so that it's a fast print. On the bottom of…
Inspired by @chardane on Twitter I set out to make some keycaps for the Adadfruit MacroPad that had excellent shine-through of the LEDs and also made as much of the plate PCB's artwork visible as possible. Unlike @chardane's design, the…
Nothing big, I just made some slight adjustments to properly fit the 5-way nav switch available from Adafruit. https://www.adafruit.com/product/504 Red is Tianse PLA, Silk Purple is Amolen PLA, black is Sainsmart TPU. Category: Video Games
This model was created to make the arm that holds the soldering iron a lot more rigid. The design is the same as the stock roller plate except I added the t-slot protrusion from the weight holder to the back of the roller plate. This…
Assembled with four countersunk M2.5 screws. If the buttons get stuck it may need some rough edges filed off the holes.
A lid to protect buttons and encoder while carrying the macropad in your backpack or pocket. Follow if you like it
All–In-One Retro Game Controller & Console The Adafruit Joy Bonnet is a tiny add-on for the Raspberry Pi W that features a 2-axis joystick and 8 buttons. It's great for making retropie projects. In this tutorial, we'll learn how to use…
A good alternative for Adafruit heat set inserts press if you need compatibility for pinecil soldering iron.
The include .3mf file fits an Adafruit BH1750 (light sensor board) snugly and has holes for the pin wires. This design doesn't have the STEMMA QT/Qwiic connection accessible, as my current project cannot use it, but allows for soldering…
Housing for LED large Display 4 Digit LED BIG Display Type: Adafruit 1.2" 4-Digit 7-Segment Display w/I2C Backpack. With Connector 5 Pin Plug JST-XH on Back. 4 Screw Holes Back Side and for other Mounting Points, glue the Edge Parts with…
This is a simple case for the BQ24074 solar lipo charger from Adafruit . Print at 0.15mm layer height and 0.35mm layer width (important for letter fidelity). No supports. Use (4) M2.5x8 screws like these (socket head). M2.5x10 will also…
This remix doesn't change anything but the feet. If you haven't printed the original case, go here and print nlapenn's slim version: https://www.printables.com/model/138045-adafruit-macropad-case This remix is simply because the screen on…
This is a 2-part interlocking model designed to house the following components: 64x32 RGB LED Matrix - 4mm pitch Adafruit Matrix Portal - CircuitPython Powered Internet Display Black LED Diffusion Acrylic Panel 12" x 12" - 0.1" / 2.6mm…
This is a thing with 2 different stands, holder and rotary encoder cover for the Adafruit MACROPAD RP2040 ( https://www.adafruit.com/product/5100 ) or ( https://www.adafruit.com/product/5128 ). The difference with this design versus my…
Case for Adafruit 128x64 OLED Bonnet for Raspberry Pi on Pi Zero. There are versions that use 2.5mm threaded inserts and with modelled threads. In addition there are models that can attach 12mm x 2mm or smaller magnets so the case can be…
Adafruit Macropad Enclosure with the "voyager golden record" back plate exposed.
Edit 10/4/2021 - My requirements changed and so 6W is no longer enough. Updated the mount to also support the 9W solar panel. Designed for use with the Adafruit 6W "huge" solar panel and 9W "colassal" solar panel…
An Din Rail mount for up to five Adafruit Qwiic modules using M2.5 screws. This is for a more permanent usage. This design can mount up to five modules. The double set of screw holes in the last position allows for hanging a module off…
BOM: 1 - M3 x 40 SHCS 1 - M3 x 10 SHCS 2 - M3 heat inserts 1 - M3 Thumbscrew by Elothan 1 - 2x6mm O-ring (optional) Printing Tips: No supported required. Hinge prints in place, and will break free when you close the mount after printing.…
A bracket for the Adafruit VL53L0X ( https://www.adafruit.com/product/3317 ) or the VL6180X Time of Flight Distance Sensor. In fact it will hold any breakout board using the 0.8 X 0.7 in form factor, that has the communications pins in…
A bracket for the Adafruit VL6180X ( https://www.adafruit.com/product/3316 ) or the VL53L0X Time of Flight Distance Sensor. In fact it will hold any breakout board using the 0.8 X 0.7 in form factor, that has the communications pins in…
This is a compact and functional tray designed to securely hold Adafruit QT PY and/or Seeed Studio XIAO microcontrollers. Perfect for organizing your desk or project space, the tray includes individual compartments sized specifically for…
Did you buy the MacroPad barebones, like I did, and realized that you had no plate to anchor the switches to? Yeah, that happened. So, OpenSCAD to the rescue. I found the dimensions of the plate on Adafruit's site and with some BOSL magic…
Spent ages trying to work this design out, 2 days latter it was done, bits fit nicely although tight squeeze but it fits, extra height incase an arduino is used, i brought all the bits from Adafruit, but can i work out the building of of…
Print with top side down
NTP clock with ESP8266. I removed the toggle switch from the back because I can't find a way to turn off the LED. :P You need: Adafruit 1.2" 4-Digit 7-Segment Display w/I2C Backpack https://www.adafruit.com/product/1269 Adafruit Feather…
See my blog post for how this was used in my case. To assemble, you will need 4x M3 x 16mm screws, for example RS 281-013 4x M3 5.5mm nuts, for example RS 527-230 4x 20x2mm metal disks as magnet-counterparts, for example these ones . The…
I use Adafruit's USB Isolater (https://www.adafruit.com/product/2107) whenever I'm programming an ESP or similar microcontroller in a live circuit so I don't have to worry about backfeeding power into my computer. It is an ESD-sensitive…
This heat set insert press base is designed to work with the Adafruit heat set rig ( https://www.thingiverse.com/thing:3613621 ) or similar models. It provides a stable and precise platform to hold the soldering iron vertically, ensuring…
This is a remix of the EVA mount for a Bondtech LGX extruder attached to MGN12 rails (part: top_lgx_mgn12_b.stl). This version extends the right side of the part and makes room for an Adafruit ADXL345 accelerometer. Why would you want to…
I use small lipo batteries for a number of electronics projects, and the adafruit Micro-Lipo charger works well to keep the lipo batteries charged. I didn't want to have to worry about accidentally causing a short on the board by charging…
I've designed a simple macropad using the Adafruit Neokey 1x4 PCB and a Seeed Studio Xiao microcontroller. Since all Seeed Studio Xiao microcontrollers as well as all Adafruit's QT py microcontrollers share the same dimensions, any of…
This is a connector between the Modular Rover Tracks project and Adafruit's Mini Red Round Robot Chassis Kit . If you already have this chassis, or are planning to buy it, this connector allows you to convert Adafruit's chassis into a all…
I ran 3, 24 awg wires, from the RGB through the housing and added a piece of heat tube where the wire is exposed on the outside. I ran it outside because I am not great at Fusion 360 and didn't know how to mod the file any other way at…
Case for Adafruit ESP32 Feather V2 andLithium Ion Polymer Battery
A case to prevent shorting the bottom pins on an Adafruit Feather while still having access to all the pins. It was designed for the ESP32 feather but will probably work with any feather and maybe most feather wings as well. There's a…
Hide all the circuits behind this sleek display stand for an Adafruit 2.13" eInk / ePaper Display FeatherWing . Definitely recommend printing with supports. Attach your FeatherWing behind the stand with some nylon M2.5 Thread screws . You…
Small enclosure with lid for the Adafruit SCD-40 / SCD-41 board for CO2 / temp / humidity sensing. Includes cutouts for the I2C and a honeycomb pattern for airflow to the sensor, as well as an offset tab for bolting the case to something…
Need to secure your Adafruit Circuit Playground Express (CPX) from the hands of Rebel Scum? Or keep the Empire from stealing yours? This case will hold a CPX with holders for threaded inserts and a snap fit cover with the logo of the…
The model I printed has the Adafruit logo, but I have removed it from the uploaded model. Supports are necessary for the rod.
I wanted to be able to use a Raspberry Pi Camera with Octoprint for remote monitoring of my printer using this mount , however the longest compatible FCC cable I could find for the Pi Cam and Raspberry Pi Zero was 30 cm. This is not long…
I bought a ESP8266 Huzzah Feather and 3.5" LCD Featherwing from Adafruit and wanted a table top case to put them in. I designed the case just big enough so that the displayable area of the LCD is centered in the bezel. The top and bottom…
A replacement blade holder to hold a Adafruit Jewel in place of the normal blade. Use 2x M2 heat set threaded inserts and 2x M2x6mm screws. Adafruit Jewel: https://www.adafruit.com/product/2226 Heat Sets:…
I needed a something to keep my PyPortal Titano steady. I also wanted to keep components and pins from potentially shorting out if I set the Titano down on something conductive. I wasn't happy with my designs for a full case so I came up…
I was looking for a way to mount my ADXL345 for Klipper's input Shaper on my Ender 3, and came across this bed mount , but I wanted to make it usable with the Ultimate Ender 3 Bed Leveling Knob rather than the standard bed levelling…
As the project is incredibly fun for kids, I wanted to start bringing small upgrades to it. The most popular speakers that are commonly used in the lightsaber community are 28mm 3W (4Ohm ) , and with this small adapter this is an easy way…
Snap fits onto the PCB and retains access to the touch pads on the back of the circuit board. Can be secured with a dab of glue if you do not need access to the reset button. Prints face down with the 45 degree overhang to the front of…
A smaller version of my 3d rgb led matrix project. The project can found at: https://www.instructables.com/A-Simple-3D-Printed-Frame-for-an-RGB-LED-Panel/ The panel used in this project is https://www.adafruit.com/product/5036 It is a…
Resized the led ring recess to fit a slightly smaller led ring. Cut out a recess to route wires behind the led ring. I used this ring: https://www.amazon.com/gp/product/B00KAE3R1U/ ID 24.4mm OD 36.67mm Standard Raspberry Pi camera v2.1.…
Printed using PLA using 0.20mm SPEED preset with organic supports enabled.
