1 / 5
AdaFruit Heat Set Insert rig -- Sremtch Remix
Order a print of this model
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
This is a lightly remixed version of the original from AdaFruit, modified for increased printability and a new iron.
- Rating
- 5 / 5
- Likes
- 32
- Downloads
- 221
- Makes
- 3
- Views
- 2,445
- Reviews
- 2
Updated at source:
Model information
- Source
- Printables
- Category
- Tools
- License
- Creative Commons — Attribution
This is pretty much the same as the original, just easier to print and with a modified soldering iron clamp to fit the [Sremtch MH2001](https://www.amazon.com/Electronics-Soldering-Thermostatic-Adjustable-Temperature/dp/B08L39DWNY/ref=sr_1_6?dchild=1&keywords=sremtch&qid=1613969981&sr=8-6), which has adjustable temperature, an inbuilt on/off switch, and an LCD display.
Modifications include:
- Uses an F688z bearing, which is easier to find (and I had a few banging around)
- combines two of the idler mounting pieces into one, saving two screws and inserts
- combines the handle with the roller plate, which are easily printable as one
- increases clearances between the extrusion, roller plate, and weight bucket. On my first print, they were all way too tight.
- better insert hole sizing when using the 4.3 mm OD [94459A130](https://www.mcmaster.com/94459A130/) inserts from the BOM
Works great!