1 / 5
AdaFruit Heat Set Insert rig -- Sremtch Remix
Zamów wydruk tego modelu
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
This is a lightly remixed version of the original from AdaFruit, modified for increased printability and a new iron.
- Ocena
- 5 / 5
- Polubienia
- 32
- Pobrania
- 221
- Wydruki
- 3
- Wyświetlenia
- 2445
- Oceny
- 2
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Tools
- Licencja
- Creative Commons — Attribution
SzczegółyPliki (18)Wydruki i komentarze (Wydruki: 3) (Komentarze: 4)Remiksy (0)Kolekcje (73)Powiązane
This is pretty much the same as the original, just easier to print and with a modified soldering iron clamp to fit the [Sremtch MH2001](https://www.amazon.com/Electronics-Soldering-Thermostatic-Adjustable-Temperature/dp/B08L39DWNY/ref=sr_1_6?dchild=1&keywords=sremtch&qid=1613969981&sr=8-6), which has adjustable temperature, an inbuilt on/off switch, and an LCD display.
Modifications include:
- Uses an F688z bearing, which is easier to find (and I had a few banging around)
- combines two of the idler mounting pieces into one, saving two screws and inserts
- combines the handle with the roller plate, which are easily printable as one
- increases clearances between the extrusion, roller plate, and weight bucket. On my first print, they were all way too tight.
- better insert hole sizing when using the 4.3 mm OD [94459A130](https://www.mcmaster.com/94459A130/) inserts from the BOM
Works great!