Adafruit BH1750 Case
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Bottom half of a case to fit an Adafruit BH1750 Light Sensor
- Rating
- 0 / 5
- Likes
- 3
- Downloads
- 86
- Makes
- 1
- Views
- 1,967
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Electronics
- License
- Creative Commons — Attribution — Noncommercial — Share Alike
The include .3mf file fits an Adafruit BH1750 (light sensor board) snugly and has holes for the pin wires. This design doesn't have the STEMMA QT/Qwiic connection accessible, as my current project cannot use it, but allows for soldering to the main pins and through hole for the wires. While the case is specific to the BH1750, it can fit any other Adafruit sensor board with overall dimensions of 1"x.7". An acrylic/plexiglass cover can be cut and glued to the top of this case to seal it from the elements and allow light transmission. I hot glued the sensor to the case so it wouldn't slide around.
Print Settings
PLA
- .3 layer height
- 2 perimeters
- 4 top layers
- 3 bottom layers
- Total print time=10minutes.