1 / 4
Adafruit SCD-40 / SCD-41 Enclosure with Lid
Order a print of this model
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Ensolure for Adafruit's popular CO2, Temperature & Humidity breakout board
- Rating
- 0 / 5
- Likes
- 3
- Downloads
- 55
- Makes
- 0
- Views
- 416
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Electronics
- License
- Creative Commons — Attribution — Noncommercial
Small enclosure with lid for the Adafruit SCD-40 / SCD-41 board for CO2 / temp / humidity sensing. Includes cutouts for the I2C and a honeycomb pattern for airflow to the sensor, as well as an offset tab for bolting the case to something with a M3 bolt.
Requires 4x M2x12->14mm bolts to secure enclosure top to bottom. You could probably use only two bolts depending on your needs.
I've included gcode files for 0.1mm and 0.2mm prints with either PETG or PLA, along with the original Fusion 360 design files.