Adafruit PyPortal Titano Base
We calculate the final price from your selected file. You review and accept it before payment.
Preliminary estimate for PETG
€0.87 – €1.06 net (excluding VAT)
For file: FlatTitanoBase_0.2mm_PETG_MK3S_1h11m.gcode
This is an estimate for one file. You’ll confirm the exact price before ordering.
File and estimate settings
File used for this estimate
Average indicative estimate: €0.96 excluding VAT (range midpoint).
- Weight reported by the author
- 8 g
- Print time reported by the author
- 1.18 hr
- Source material
- PET
- Estimate material
- PETG
- Estimate printer
- Bambu Lab P1S - 0.4 nozzle
- Estimate process
- 0.20mm Standard
Indicative estimate for the selected file only, based on the author’s weight and print time. File variants are not added together. The final price is calculated after file analysis.
Saved on this device.
A platform that mounts to the bottom of PyPortal Titano. Helps protect components and provides a flat surface to sit on
- Rating
- 5 / 5
- Likes
- 3
- Downloads
- 50
- Makes
- 2
- Views
- 334
- Reviews
- 2
Updated at source:
Model information
- Source
- Printables
- Category
- Electronics
- License
- Creative Commons — Attribution
I needed a something to keep my PyPortal Titano steady. I also wanted to keep components and pins from potentially shorting out if I set the Titano down on something conductive.
I wasn't happy with my designs for a full case so I came up with this simple platform/base in Fusion 360 (F3Z included in the files). The design includes cutout areas over the reset button + activity LED and the micro SD card slot.
Printing
Dead easy. Should work in any material, on any printer with pretty much any nozzle size. No supports needed.
Use
The base mounts to the Titano via four 2.5mm screws. Screw length should be in the range of 4 to 10mm or so. As designed the holes will need to be tapped so make sure you have a 2.5mm tap on hand!