A Mount for an 64x32 RGB LED panel with an Adafruit MattixPortal
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
A smaller version of my 3d rgb led matrix Instructable.
- Rating
- 0 / 5
- Likes
- 4
- Downloads
- 45
- Makes
- 0
- Views
- 1,230
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Electronics
- License
- Creative Commons — Attribution — Noncommercial
A smaller version of my 3d rgb led matrix project. The project can found at:
https://www.instructables.com/A-Simple-3D-Printed-Frame-for-an-RGB-LED-Panel/
The panel used in this project is
https://www.adafruit.com/product/5036
It is a 64x32 RGB LED Matrix with a 2.5mm pitch.
This version does not require an extender cable.
If you are using an Adafruit Matrix Portal, use the right beam with cutout. It allows you mount the RGB LED panel flush with the front of the frame.
Print Settings
Printer Brand:
Prusa
Printer:
I3 MK3S
Rafts:
No
Supports:
No
Resolution:
200
Infill:
38
Filament:
inland pla
Category: Electronics