Raspberry Pi 4B + Adafruit 3.5 TFT Case + Tabletop Mounting Brackets
We calculate the final price from your selected file. You review and accept it before payment.
Preliminary estimate for PETG
€1.65 – €2.02 net (excluding VAT)
For file: bracket_0.2mm_PETG_MK3S_1h51m.gcode
This is an estimate for one file. You’ll confirm the exact price before ordering.
File and estimate settings
File used for this estimate
Average indicative estimate: €1.83 excluding VAT (range midpoint).
- Weight reported by the author
- 24 g
- Print time reported by the author
- 1.86 hr
- Source material
- PET
- Estimate material
- PETG
- Estimate printer
- Bambu Lab P1S - 0.4 nozzle
- Estimate process
- 0.20mm Standard
Indicative estimate for the selected file only, based on the author’s weight and print time. File variants are not added together. The final price is calculated after file analysis.
Saved on this device.
Remix of the original Pi TFT case with extra inside space, ribbon cable slot, and tabletop mounting brackets.
- Rating
- 5 / 5
- Likes
- 20
- Downloads
- 121
- Makes
- 1
- Views
- 1,354
- Reviews
- 2
Updated at source:
Model information
- Source
- Printables
- Category
- Electronics
- License
- Creative Commons — Attribution — Noncommercial — Share Alike
I remixed the original case and thickened it enough to allow for the fan to be mounted inside. I also added a ribbon cable tab below the Pi's USB connections. With the added thickness, I was able to pull the ribbon cable out vertically which made it easier to bundle with the other cables coming out of the Pi's right side.
Print settings were fairly stock, but I did add supports for the cutouts because the PETG bridging across the rPi port openings wasn't as neat as when I originally printed my case in PLA.