Bird Bath remixed for US-Standard 2L PET bottle
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Replaced cap threads with PC028 US-standard sealing PET bottle cap.
- Ocena
- 5 / 5
- Polubienia
- 5
- Pobrania
- 9
- Wydruki
- 1
- Wyświetlenia
- 61
- Oceny
- 1
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Outdoor & Garden
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
Remixed water bath "cap" with PC-028 US-standard sealing PET bottle cap mount. Print files:
"Bird Feeder cap v2.3mf" -or- "Bird Feeder cap v2.stl"
"Bottle Sleeve.3mf" -or- "Bottle Sleeve.stl"
"Bird Feeder" and "2x4 mount" files; original model files (deleted?)source OnShape
For printing, I suggest using the included 3MF file + 2L Bottle Sleeve. Otherwise, use print orientation as provided in STL mesh. I used tree supports, no interface layer, and the PrusaSlicer 0.15-Structural profile. If you're using a 2L bottle, print two or three of the Bottle Sleeve parts - they're intended to be hot-glued to the outside of the bottle and should help prevent it from collapsing under the negative pressure.
I've included all the source STEP files, along with the FreeCAD assembly and model files used in the remix. in case anyone wants to further remix this.