Hydroponic VIVOSUN wall mount and LumaRay LED Bar bracket
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Bracket set to mount VIVOSUN hydroponic system to a wall, and space LED light bars away from the plants at a fixed angle
- Ocena
- 0 / 5
- Polubienia
- 5
- Pobrania
- 9
- Wydruki
- 0
- Wyświetlenia
- 87
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Outdoor & Garden
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
Designed to fit with Vivosun hydroponic systems:
VIVOSUN LumaRay LED Light Bar 1.4' https://amzn.to/3S0likB
VIVOSUN Hydroponic 54 Plant Grow Wall Mount Kit https://amzn.to/4uH5bH6
Designed these these 2 brackets to mount the hydroponic tube system to the wall, and these LED light bar brackets to pull the lights away from the plants which are strong enough to burn them (spring mix lettuce) as they grow taller and, which should cause them to grow away from the wall.
Notes:
Print in whichever material you want, the stronger the better. 2 brackets for each LED, 4 wall brackets required for the hydroponics system itself, but more is not a bad thing.
I printed in Heygears PAT10 Transparent for LEDs for less visual intrusion, and Heygears PAU20 Polycarbonate-Like Black for the wall brackets for strength.
LED Wall brackets V1 and 2 are different, V2 has an extension down the back which presses against the wall at a set angle. V1 does not if you want to set a new angle on your own, it will require something like double sided tape to attach it and keep it from spinning.
To light the entire hydroponic system, you will need more than 4 LED bars. I plan on having 2 of these hydroponic systems and 3 sets of lights to cover everything eventually.