1 / 5
X-Carve Y Carriage dust covers With brushes — zdjęcie 1
1 / 5

X-Carve Y Carriage dust covers With brushes

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

This is a redesign of phraust Y-Axis Motor Covers. Below is a list of modifications I made to that design for my own…

Ocena
5 / 5
Polubienia
18
Pobrania
99
Wydruki
1
Wyświetlenia
588
Oceny
1

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Kategoria
Other Ideas
Licencja
Creative Commons — Attribution — Share Alike

This is a redesign of phraust Y-Axis Motor Covers. Below is a list of modifications I made to that design for my own needs.

Alternate magnet type

Front and Rear V-Track brushes that will keep the v-track clear of debris.

Adjusted height to work with Y-Axis Stiffeners.

It uses 18 mm diameter magnets that are 5 mm thick you can buy at Lowes or Home Depot.

The brush is 1 inch brush strip from McMaster Carr. Same brush used for the Suckit Dust boot.

Print Settings

Printer Brand:

Monoprice

Printer:

Maker Select

Rafts:

No

Supports:

No

Resolution:

.2

Infill:

20%

Notes:

Print flat side to the bed.

Category: Parts

Tagi