1 / 5
X-Carve Y Carriage dust covers With brushes — image 1
1 / 5

X-Carve Y Carriage dust covers With brushes

Order a print of this model

We calculate the final price from your selected file. You review and accept it before payment.

Saved on this device.

This is a redesign of phraust Y-Axis Motor Covers. Below is a list of modifications I made to that design for my own…

Rating
5 / 5
Likes
18
Downloads
101
Makes
1
Views
590
Reviews
1

Updated at source:

Model information

Category
Other Ideas
License
Creative Commons — Attribution — Share Alike

This is a redesign of phraust Y-Axis Motor Covers. Below is a list of modifications I made to that design for my own needs.

Alternate magnet type

Front and Rear V-Track brushes that will keep the v-track clear of debris.

Adjusted height to work with Y-Axis Stiffeners.

It uses 18 mm diameter magnets that are 5 mm thick you can buy at Lowes or Home Depot.

The brush is 1 inch brush strip from McMaster Carr. Same brush used for the Suckit Dust boot.

Print Settings

Printer Brand:

Monoprice

Printer:

Maker Select

Rafts:

No

Supports:

No

Resolution:

.2

Infill:

20%

Notes:

Print flat side to the bed.

Category: Parts

Tags