Monoprice Maker Select/Wanhao i3 Raspberry Pi camera mount
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Couldn't find a decent camera mount for my Pi camera that mounted center the bed and moved with the bed so I designed…
- Ocena
- 0 / 5
- Polubienia
- 3
- Pobrania
- 14
- Wydruki
- 0
- Wyświetlenia
- 271
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other Printer Parts & Upgrades
- Licencja
- Creative Commons — Attribution — Noncommercial
Couldn't find a decent camera mount for my Pi camera that mounted center the bed and moved with the bed so I designed this one. Added counter sunk holes for the springs so you wont lose much adjust when leveling. There are several Pi camera enclosures here on Thingeverse that will work with the mount on the center of the bracket. I will add some links later if there is any interest.
UPDATE:
Added two new longer arms. an 80mm and 100mm arm to extend the distance of t he camera from the bed. I personally prefer the 100mm as it gives a very clear view of the whole bed.
Print Settings
Printer:
Maker Select V2
Rafts:
No
Supports:
No
Resolution:
.2
Infill:
50%
Notes:
When you load it in the slicer it will probably complain it doesn't fit. Just turn it diagonally on your bed and it will fit the Maker Select or Wanhoa i3 just fine and print with a brim without issues.
Designed in Fusion 360
Category: 3D Printer Parts