Liczymy pasujące modele…
Couldn't find a proper filament spool holder that would rotate smoothly, so I modeled one myself. Uses the slots reserved for an enclosure on the right side of the housing (distances on the left are different, so not compatible I'm…
A cover for the lcd screen on the monoprice select mini v2.
Status: April 3. 2026 - The printer has been working well on the base. I'm working on pictures of the wiring. Note: This project is very much a work in progress. Models will change but I'm looking for feedback on the model, consideration…
This is a filament spool holder for the 3d printer Monoprice mini v2 (also v1). A axial baring makes it silent and smooth. The spools can be stored on top of the printer without interfering while printing. There are two kind of handles…
A Duet2Wifi borad mount for the Monoprice Mini Delta. Uses the original board's mount holes.
Printed with a Monoprice Select Mini. To securely mount the powerbrick. Mounts are slightly less tall then the powerbrick so the rubber feet grip on the surface you mount it on. Timelapse: https://www.youtube.com/watch?v=-HWKaUpa6VQ Edit:…
This is an adapter plate for the Wanhao Duplicator i3 aka Monoprice Maker Select V2 for mounting aftermarket electronics boards. This mounts in place of the stock Melzi Ardentissimo board and allows you to install: (1) E3 form factor 3D…
A simple Belt tensioner for the Monoprice v2, made for Mr. Sand_man You need to drill a hole in the frame for this to work, but the printed parts serves as a guide. Hole needs to be 5mm at the minimum, 6mm maximum. Hardware needed: 3x…
Side panel for the Monoprice Select Mini with cutout for rerouting the bed cables and modified side panel opening to fit a BTT SKR 1.4 e3 v2 control board replacement.
This is just a remix on the great design here: https://www.thingiverse.com/thing:2000793 by by o13102 I just wanted a more cleaned up version that wouldnt require any supports and I removed the logo as it just adds time to the print that…
Remixed from https://www.thingiverse.com/thing:2843422 to enlarge the notches to fit an Arducam, which is a little bit thicker and wider than a Pi cam. Needs to be paired with cam_arm_v2.stl from the Pi cam thing linked above. Category:…
This is a remix of an amazing design by berky93 on thingiverse I mirrored the piece for the left side and added length to the stand off so a roll of tape will fit nicely. This is my first remix so constructive criticism welcome! Original…
MINIMONOPRICE The Mini Monoprice Mini To teach myself modeling and 3D printing I've started working on a 1/3 ischz scale model of my Monoprice Select Mini, my first printer that I just recently bought and am loving the hell out of! I…
I wanted a minimal spinner for my Monoprice Select Mini V2 because I'm really not into all these OTT designs. This is a "boring man's" no-thrills functional spinner. It's not the most snug fit because I know different PLAs shrink at…
Remix of patprint's remix of uwe999's remix of rawlogic's MOSFET mount to be shorter in the Z dimension from 8mm to 6mm. The reason I remixed it is because 8mm is taller than the stock standoffs in the maker select v2.1 control box.…
The PTFE Bowden tube on my Monoprice MP10 (Creality CR-10 clone) wasn't well supported where it left the extruder. It drooped excessively which seemed to cause unwanted friction on the filament, so I designed this bracket to resolve the…
My Monoprice MP10 (Creality CR-10 clone) fitted with an alloy MK8 Bowden Extruder upgrade would turn any soft filament into spaghetti due to the filament path floating in mid air after passing the extruder feeding gear. I designed this…
Monoprice Delta Mini V2 Orcaslicer Profile with build plate
I have a Monoprice Voxel III P 3D printer that my students use at school, but it uses an unusual size spool for the filament. I looked through all the spool winders I could but could not find one that fit, so I designed this one on…
An updated design which removes alot of excess material and print time while increasing durability. Designed mainly for use with the MP Delta Pro and Hatchbox Spools but will work with many applications with slight modification. UPDATE 1:…
My goal is to print small ABS things without issue. Mini Delta for starters, later Delta pro. Feel free to print and enjoy as this project is complete and works on all 3 sides :D And hey, if you were blessed by this design wont you leave…
Need a washer for the glass plate x6 to prevent scratching glass. UPDATE 1: Made it thinner, print in 0.1mm for best results! Category: 3D Printing
I know its tedious, but if you have a delta pro do this as your first print, itl save you some headaches. 270mm covers the whole bed so print with no support whatsoever. Category: 3D Printing
This print is a part of the whole VESA mounting solution. Prepare: Item Count File Note VESA mounting plate 1 - I have used 2mm steel. PETG plastic is possible (see example my Ikea print) Plug 1 mount.step printing instructions below…
I have designed these replacement parts for my AlzaErgo monitor arm, but I didn't need them in the end. Nevertheless I have decided to publish them as a baseline. I have printed them from PETG and found out, that this material was too…
First export of my own setup, refined with time, this setup is working very well for me, including the fan ducts. Feature highlight: TPU friendly, can print TPU at quite high speeds blower fan adapter for the E3Dv6, for a stronger cooling…
Hi this is my first attempt at 3D modeling, i just wanted a way to carry my bambu glue stick with my 3d printer and thought id try to make a simple little holder for it. I forgot to make holes and just drilled them in the end but if…
This is a work in progress (V1 untested) 15-April-2019 Corrected some missing levels icons of the TFT and added an emergency Stop in the custom menu to use when working with Octoprint. 3-April-2019 Move the MKS Main Board up to 4.2mm so…
Other hardware required: 6mm or SAE almost-equivalent bolt and nut. Using paxamime's excellent original dial indicator gauge mounts as a base I've modified them to fit a Harbor Freight or Chinese equivalent dial indicator gauge. It's one…
This X axis end cap for the Monoprice Select Mini (MPSM) is slightly larger and sturdier than the original. It also clamps on using M3 screws and M3 square nuts rather than being glued in place. I had to replace the X axis rods on my MPSM…
This model was used to facilitate the replacement of my Monoprice Select Mini's screen with the BTT TFT24. I used a small saw to cut material from the side of the printer to allow for SD card access, and on the opposite side of the…
Parts required: X axis carriage 2 - M3 x 6 mm threaded inserts 4 - M3 x 4 mm threaded inserts 4 - M3 x 8 mm threaded inserts 3010 blower fan 2 - M2.5 self-tapping screws 3 - M3 x 6.5 mm threaded spacers (or 6mm + washer, example ) 3 - M3…
Parts required: X axis carriage 2 - M3 x 6 mm threaded inserts 4 - M3 x 4 mm threaded inserts 4 - M3 x 8 mm threaded inserts 4010 blower fan 4 - M2.5 self-tapping screws 3 - M3 x 6.5 mm threaded spacers (or 6mm + washer, example ) 3 - M3…
This is a replacement base for the Monoprice Mini Delta 3D Printer. This works for V1, V2, and V3 versions of printer. This model includes a mounting point for a 6010 fan that the printer comes with along with mount points for future…
Couldn't find a proper filament spool holder that would rotate smoothly, so I modeled one myself. Uses the slots reserved for an enclosure on the right side of the housing (distances on the left are different, so not compatible I'm…
I've collected all of the parts from both the parent project and the grandparent project. The parent project didn't include the top braces nor the ball nuts, and two of the STLs were mangled (front right was miniaturized, back right…
Riser feet for the Monoprice Mini Delta 3D Printer. Uses ZeroG BOM Spec Amplifier Feet . Designed to be mounted with the stock screws. Other M3x8 screws will work as well. Thank you @JLake3D for the MPMD CAD reference BOM (Bill of…
These parts make up a total bed exchange for a Monoprice Mini. This add manual leveling to mine, which did not have it. Check out the assembly video: https://youtu.be/7QtzCL9a45Q If you would like to support me:…
This is the Z-Axis spacer that I use on my printer. It is 5mm tall. I needed the extra height on my printer. It's not glamorous but it works. If you would like to support me: https://ko-fi.com/tinyboatproductions
I designed this for the Monoprice Maker Ultimate printer because every filament guide I have seen for this printer just didn't work well for me and I think made my extruder skipping worse sometimes.. I am currently using this wonderful…
Stock pads on the Monoprice retro are slim so the tips of my ear touch the driver grill. Instead of buying a $40 set of brainwaves pads with taller padding, I made this spacer in two heights. 0.375" and .45" Offset height Prited on a…
I adjusted the bolt and nut to fit the factory mount on my Monoprice. Helps with the more sustainable paper/cardboard filament spools as manufacturers move away from plastic and it also puts less strain on your extruder. Credit to…
allows you to put a monoprice select mini v2 hotend in place of a ender 3 one
Modified a great model from Matthew Sitton to be able to fit mini XLR cables to be able to use cables from Audeze LCDModified a great model from Matthew Sitton to be able to fit mini XLR cables to be able to use cables from Audeze LCD.…
Two small printable models to convert the Y-Axis rods to MGN9 Linear Rails on Monoprice Select Mini 3D Printers; especially helpful if your y-axis linear rods are worn out. This design was inspired by Paroni's Monoprice Select Mini V2…
Simple covers for the LCD and control knob holes in the chassis. Used when my control board died and I moved to a USB only mainboard. Category: 3D Printer Parts
I wanted to do the well known NEMA-17 Z-axis mod (https://hackaday.io/project/14823-monoprice-select-mini-maximum-3d-printer-mods/log/55525-upgrade-the-z-axis-with-a-nema17-stepper-and-tr8x8-leadscrew) but for some reason I found my…
A Collection of Monoprice Select Mini Side Panels with a combination of features. Vented side panels for extra air circulation Left side panel with 40mm fan mounting point Left side panel with C14 power connector for internal power supply…
Springy Fan bracket for MPMD V2. I bought new fans (Sunon MF40101V2-1000U-A99 for inside and MF30101v2-1000U-A99 for hot end) for my MPMD v2 but the internal one was still making a lot of noise, figured out it was making the plate it was…
These are frame clips to attach a W5 Pro Mini PC to the side of a 3D printer. I've included clips for the Anycubic i3 Mega and the Monoprice Maker Select. The clip is designed in a way that the Mini PC can be removed from it easily enough…
I was tired of the flex generated on the thin metal Y axis motor mount when belt tension was applied. The rear Y axis motor mount bends and this spacer/plate stops the motor from bending inward when tension is made to the shaft. Probably…
The second design I've made, but this one for the 240w version. The 350 is found here: http://www.thingiverse.com/thing:2010282 You will need: This Bracket The 4 original M3 8mm cap bolts used to affix the ugly original old power supply 4…
After 2 failed power supplies, I am considering purchasing the Meanwell NES-350-12 for the control box. I have also made the 240w version, found here: http://www.thingiverse.com/thing:2020651 You will need: This Bracket The 4 original M3…
After getting my filament jammed with other filament guide, I decided to design my own filament guide. Print instructions Category: 3D Printer Accessories
V3 - Fixes the placement of the screw. it was offset previously and caused issues. From original On the Monoprice Mini Delta the feed hose going to the extruder tends to get caught in the motors on occasion. This causes some very bad…
After disconnecting the cable bundle and moving the ptfe tube, the cable bundle/ptfe tube would get pinched between the control arm and the frame during a homing sequence causing the motor to grind and skip. I made this to keep the bundle…
Brackets to screw a Monoprice SuperSpeed USB-C to 7-port USB3 hub to the underside of my desk. The hub is Monoprice Product # 14909 I designed it to use #6 1/2" screws, but that's easy to change. Customizable. Print Settings Printer…
Monoprice Mini Delta Top Spool Holder Can be printed on the Mini Delta due to the part been split I used this with the below filament adapter: Customizable spool adapter by RomanoLindano inner = 21; outer = 58; wall = 2; deep = 50; Print…
I am lazy and I did not want to have to buy new screws, so I designed this handle for the MPSMv2. It might fit a V1? I'm not sure. Uses 3 of the stocks screws which hold the metal frame together. You can print without supports, or add a…
Bracket to hold Bigtreetech skr mini E3 board, raspberry pi and buck converter where old board used to sit. Slides onto the posts underneath the heated bed plate.
A fan bracket that holds 2 40mm noctua fans to cool the electronics on Monoprice Mini Delta. use the original screws the fans come with for the output fan side. For the input fan side use long m2 screws and a nut on the end.
A cover for the lcd screen on the monoprice select mini v2.
Status: April 3. 2026 - The printer has been working well on the base. I'm working on pictures of the wiring. Note: This project is very much a work in progress. Models will change but I'm looking for feedback on the model, consideration…
Octoprint case for Monoprice Mini with optional power switch, works with Raspberry Pi 2 Print Settings Printer Brand: Creality Printer: Ender 3 Rafts: No Supports: No Resolution: 200 Infill: 38 Filament: PolyMaker PETG Category: 3D…
For using LJ12A3-4-Z/BX proximity sensor on the Monoprice MP10 (CR10-style) 3D Printer. The bed levelling sensor can be hard to find so if it fails this bracket can be printed that utilises the existing mount and m2.5 screws to adapt to…
Wanted to mount the camera to the frame of my Monoprice Maker Select Plus. Designed the bracket and then added the male link. Compatible with the Articulating Raspberry Pi Camera Mount for Prusa MK3 and MK2 by Sneaks (…
I mad this wheel to guide filament if the spool is set up on the control box instead of on top.
This thing was made with Tinkercad. Edit it online https://www.tinkercad.com/things/bgXvwdSItxv Print Settings Printer Brand: Wanhao Printer: Wanhao Duplicator i3 V2 Rafts: No Supports: No Resolution: .2 Infill: 30% Notes: Needed a way to…
This thing was made with Tinkercad. Edit it online https://www.tinkercad.com/things/7moHU0eXjA2 Print Settings Printer Brand: Wanhao Printer: Wanhao Duplicator i3 V1 Rafts: Doesn't Matter Supports: No Resolution: .2 Infill: 30% Notes: I…
Stabilizer coupler for 1/4" steel rod to m5 nut. Seat everything using JB-Weld. Prints with no supports. You'll also need 2 right and two left of these - POSA5 SA5T/K 5mm Male Metric Threaded Rod End Joint Bearing M5x0.8mm As well as 4…
remix of https://www.thingiverse.com/thing:4769322 by https://www.thingiverse.com/CliffR i decide to cut the base part for having more space and eliminate the 8mm sensor holder for using another separate holder you can look there my…
Print 3 replaces existing legs, will us squash balls like double yellow dot.
Couldn't find a decent camera mount for my Pi camera that mounted center the bed and moved with the bed so I designed this one. Added counter sunk holes for the springs so you wont lose much adjust when leveling. There are several Pi…
These are parts to convert your Monoprice Mini Delta to have a Bigtreetech SKR mini E3 mainboard and TFT35 touch screen. It also contains parts to covert your printer to house lipo batteries and be completely portable. Many details below…
By following the instructions in the video, these parts will allow you to use your BLtouch with: Auto levelling at the start of each print in only 30 seconds Accurate/symmetrical spacing of probing points Automatic adjustment for any…
The standard feet on these printers suck. They fall off easily and do little to dampen vibrations. This part is designed to be printed in TPU and solve these two problems. Print settings and design process covered in detail here:…
A modified Z stop holder so the homing height could quickly and accurately be adjusted independant of the bed levelling screws. This was in preparation for fitting a thicker bed. I reverse engineered the part from a very close to fitting…
The Monoprice Maker Select V2 is a rebranded Wanhao Duplicator 3 and they are not terrible printers for the price although nowadays there are much better choices. It was the first printer I bought quite a while ago. However, they share a…
This is a quick re-mix of kapakahi's MP Mini X-Axis Limit Switch Bracket to allow it to mount on the MPSM V2 Z Carriage by muzzled. STL and CAD files are included. Print Settings Printer: Voron Rafts: No Supports: Yes Resolution: 0.2…
This is a remix of the MPSM E3D V2 Mount GT2 Belt 40mm fan 3d touch by e36ltw with several modifications and additions. I found that on my Monoprice Mini Select v2, the original by e36ltw had the BLTouch / 3D Touch mount too far back,…
This is a simple side mount for a Raspberry Pi v2.1 camera module with a Monoprice Mini Select v2. I could not find an existing design that I liked, so I designed a simple side mount and remixed parts from several designs to: avoid…
I was after a filament guide for my Monoprice Select Mini v2 that I could run some Bowden/PTFE tubing to from a dry box. Drawing on m_power's and EdventureTime's filament guides, I designed this for use with a PC4-M6 pneumatic fitting.…
This is a series of spacers or risers for the Monoprice Hank Z-wave plus door/window Sensor. There are 4 pre-made heights in 5mm, 10mm, 15mm, and 20mm. They are designed to be fixed with mounting tape or depending on the height required…
A nice addition to the buttons overlays. http://www.thingiverse.com/thing:3759917 Simple and fast printable frame. Print it, glue it with any technology to the front panel and it's ready There are two versions available - slightly rounded…
Magnetic Screen Blind for Monoprice Mini Delta Required: Magnets: 2x 10mm diameter. Some glue ;) Print Settings Printer Brand: Monoprice Printer: Mini Delta Rafts: No Supports: No Resolution: 0.2 Infill: 15% Filament: Devil Design PLA…
Squash ball feet are a great in suppressing printer vibrations - there are many projects for other machines, but I have not found anything for MPMD. So I decided to try them in the delta. Not tested yet, but i used align check from…
I was jealous that other 3D printer users had their own filament sensor accessories, and I thought it was about time for a Monoprice Select Mini user to have make it happen! So I ordered a Makerbot 1.2 style endstop from China ^^,…
The idea of this mod is to isolate already weak bed heater of the Monoprice Mini Delta V2 to prevent cool air suctioned by the electronics cooling fan entering underneath and cooling the bed plate. This is two piece component, to install…
A time-lapse camera mount for iPhone 6, 6s, 7, and 8! Note: This is a double remix. All credit goes to 79DieselRabbit, and CraigJPerry. Check out the original designs please! Note: This model is inverted, When mounting to printer, flip…
This mod allows you to have the filament roll on top of the printer instead of hanging off the side, lowering the footprint of the printer to the machine dimensions as it should have been from the beginning. Just unscrew the handle and…
I bought a standard glass printing bed off Amazon .ca because I couldn't find a reasonably priced one specific to the Mini here in Canada. I bought a 140x140mm glass bed and designed clips to hold it in place! So far I've done a dozen…
Bed align clip for Monoprice Mini Delta V2, to reduce z-wobble / rough surface / horizontal lines. A little fiddly to assemble but sturdy & easy to print. To be printed in ABS or PETG. (for flexibility and heat resistance) 0.4mm nozzle,…
A modification of tritiumfusion's version of the Wanhao i3 Plus Pulley Stabilizer, except made to work with the stock hardware that the Monoprice Maker Select Plus comes with. Category: 3D Printer Parts
I recently purchased this Mk8 extruder for my Mini v2. This Mk8 extruder is recommended for the Creality printers but I figured I'd give it a shot since it should be better for printing flexibles. Unfortunately, when I went to assemble it…
This is a model of the popular entry level MP Select Mini 3D printer Print Settings Printer Brand: LulzBot Printer: TAZ 5 Supports: Yes Notes: Rotate model 90 degrees on the Y axis to minimize supports Category: 3D Printers
This is a model of the Monoprice Mini Delta Print Settings Printer Brand: LulzBot Printer: TAZ 5 Supports: Doesn't Matter Notes: rotate model 180 degrees to minimize supports Category: 3D Printers
I have created this mount to connect a Webcam or Gopro to the Bed of my Monoprice Select Mini. This mount was designed to use the standard screws (no extra drilling necessary). Print instructions I printed the pice PLA and ironed the top…
Simple arm design to allow storing more spools of filament on the top of the printer for easier filament changes. You can print directly from the spools in this location, and more can be added as needed. Print Settings Printer: Monoprice…
My stock hotend cooling fan started making a lot of noise and I was wanting an adjustable height/removable part cooling fan so I created this. The adjustable height is probably overkill and adds weight. Main parts printed in ABS for heat…
![Powerbrick mounts for Monoprice Select Mini [V2 Added!]](https://media.printables.com/media/prints/104088/images/1044316_e6e1a4a5-ede3-46ee-aa81-3302929002b7/81deb9cf69baaf3d5626fc22d4a8467f_display_large_10.jpg)
![MonoPrice Select Mini iPhone Mount Remix [FIXED]](https://media.printables.com/media/prints/189561/images/1765064_575e33bc-add6-4bd6-b54c-47c3bcc1552d/f167a5411ac6d52495d10233aa912f1a_display_large_18.jpg)
