1 / 2
Monoprice Select Mini MGN9 Linear Rail Conversion
Zamów wydruk tego modelu
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Two small printable models to convert the Y-Axis rods to MGN9 Linear Rails on Monoprice Select Mini 3D Printers
- Ocena
- 0 / 5
- Polubienia
- 2
- Pobrania
- 13
- Wydruki
- 0
- Wyświetlenia
- 89
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other Printer Parts & Upgrades
- Licencja
- Creative Commons — Attribution
Two small printable models to convert the Y-Axis rods to MGN9 Linear Rails on Monoprice Select Mini 3D Printers; especially helpful if your y-axis linear rods are worn out. This design was inspired by Paroni's Monoprice Select Mini V2 Y-Axis Linear Rail Mount. The two provided models are oriented to be printed without support. High % infill recommended.
Materials besides the printable parts:
- MGN9 200mm Linear Guide Rails x2
- M4x10x6 Brass heat-set inserts x12
- M3x12 Button Head Screws x 8
- M4 Screws (already supplied with original printer) x12
- Bearing Lubricant
- Multi-head screwdriver kit
- Rotary tool / Dremel tool or metal saw
Assembly:
- Print two of the Base Block MGN9 Adapters and four of the MGN9 Linear Rail Brackets
- Install the heat-set inserts into the base blocks and brackets with a soldering iron.
- Screw in the MGN9 bearings to the base blocks with M3x12mm screws.
- Attach the base blocks to the base of your Monoprice Select Mini 3D Printer with M4 screws.
- Cut the 200mm Linear Rails with a saw or rotary tool to match the length of the original y-axis rods.
- Lubricate and slide the cut MGN9 linear rails onto the linear rail bearings.
- Slide the MGN9 linear rail brackets onto each end of the linear rails.
- Route the y-axis motor belt on the y-axis pulleys and set the bed base on top of the linear rails.
- Screw down the bed base into the linear rail brackets with M4 screws.