Monoprice Select Mini MK8 (creality style) extruder spacer
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
I recently purchased this Mk8 extruder for my Mini v2. This Mk8 extruder is recommended for the Creality printers but…
- Ocena
- 0 / 5
- Polubienia
- 5
- Pobrania
- 44
- Wydruki
- 0
- Wyświetlenia
- 541
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Creality Parts & Upgrades
- Licencja
- Creative Commons — Attribution
I recently purchased this Mk8 extruder for my Mini v2. This Mk8 extruder is recommended for the Creality printers but I figured I'd give it a shot since it should be better for printing flexibles. Unfortunately, when I went to assemble it using the stock extruder gear and a 4x10x4 bearing, The filament hole was too low for the filament to run in the channel of the extruder gear. Initially I used some washers to make up the distance while I designed this spacer plate to make up the distance. The thickness of the spacer plate is 1.5mm and gets the hole almost perfectly vertically aligned.
Ive included iges and f3d files if you need to adjust the thickness.
Link to extruder and bearings I used:
https://www.amazon.com/gp/product/B07G868DSK/ref=ppx_od_dt_b_asin_title_o00_s01?ie=UTF8&psc=1
https://www.amazon.com/gp/product/B075CN23K9/ref=ppx_yo_dt_b_asin_title_o00__o00_s04?ie=UTF8&psc=1
Print Settings
Printer Brand:
Monoprice
Printer:
Select Mini
Rafts:
No
Supports:
No
Infill:
100%
Category: 3D Printer Extruders