Wallmount for tubing (brewtools / gardena)
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
This is a wallmount made for holding brewtools and gardena tubing.
- Ocena
- 5 / 5
- Polubienia
- 59
- Pobrania
- 186
- Wydruki
- 1
- Wyświetlenia
- 1088
- Oceny
- 1
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Organizers
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
This is a wallmount made for holding brewtools and gardena tubing.
The top five slots holds Brewtools 16x25mm silicone tubing:
The bottom three slots holds normal gardena tubing with 16.5-17mm OD
Screws to the wall with two 4x20mm pan head screws.
Since this mount is made to be flexible i do not recommend printing this mount in PLA.
ASA, ABS or PETG is a better suited plastic for the application (i used ASA).
I recommend printing the holder on its side. To make it as sturdy as possible i used 25% infill and 4 perimeters. Prints without supports.
If you don't have a printer yourself and live in Norway, you can buy one from my website http://lysberg3d.no