Wallmount for tubing (brewtools / gardena)
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
This is a wallmount made for holding brewtools and gardena tubing.
- Rating
- 5 / 5
- Likes
- 59
- Downloads
- 186
- Makes
- 1
- Views
- 1,088
- Reviews
- 1
Updated at source:
Model information
- Source
- Printables
- Category
- Organizers
- License
- Creative Commons — Attribution — Noncommercial — Share Alike
This is a wallmount made for holding brewtools and gardena tubing.
The top five slots holds Brewtools 16x25mm silicone tubing:
The bottom three slots holds normal gardena tubing with 16.5-17mm OD
Screws to the wall with two 4x20mm pan head screws.
Since this mount is made to be flexible i do not recommend printing this mount in PLA.
ASA, ABS or PETG is a better suited plastic for the application (i used ASA).
I recommend printing the holder on its side. To make it as sturdy as possible i used 25% infill and 4 perimeters. Prints without supports.
If you don't have a printer yourself and live in Norway, you can buy one from my website http://lysberg3d.no