1 / 1
Front Fan Bezel for Supermicro 24 bay servers - 5mm spacer
Zamów wydruk tego modelu
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
With the original and PETG HF I got a 5mm gap due to shrinkage. This spacer fills that gap.
- Ocena
- 0 / 5
- Polubienia
- 0
- Pobrania
- 6
- Wydruki
- 0
- Wyświetlenia
- 92
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Computers
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
As I wrote on the original models page, I printed it on an BambuLab X1C with Bambu PETG HF, fresh spool, no calibration, stock settings, 0.4mm nozzle, 0.2mm strength profile. Thanks to shrinkage I got a 5mm gap. I designed this 5mm spacer, doesn't look pretty but now it fits.
When printing the original you ideally compensate for shrinkage in the slicer, so that you don't need this model in the first place. But since I got a DM asking me for this, I might as well upload it here.