RAK Unify Enclosure Mounting 2x1" rail 45 degree mount
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Mounting accessory for RAKwireless Unify Enclosure 100 x 75 x 38 mm.
- Ocena
- 0 / 5
- Polubienia
- 1
- Pobrania
- 7
- Wydruki
- 0
- Wyświetlenia
- 42
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Electronics
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
This is a mounting accessory for the RAKwireless Unify Enclosures. There are already a lot of mounting options, but for my specific use case I needed an easy way to clip the enclosure on a vertical 1x2" rectangular pipe in a 45 degree angle.
The mounting accessory is only matching with the Unify Enclosure 100 x 75 x 38 mm.
The accessory consist of four parts, two are screwed to the Unify Enclosure, the other two are clips that presses the enclosure and holds it steady on the pipe.
All screws required are M3 size.
Hope this helps someone else.
