Liczymy pasujące modele…
Bender's bigger, badder brother is here! Meet Flexo, the most flexible Meshtastic powered node "case kit" available… and its FREE to print! Check out the intro video HERE and the teardown video HERE . ***ASSEMBLY VIDEO NOW LIVE CLICK…
This is a modular case for the RAK WisBlock Starter Kit with the 19007 baseboard. The idea behind this project was to make a simple-to-assemble and customizable case and also eliminate screws, washers and fasteners other than those that…
Just a very simple basic case for the RAK Wisblock and the RAK Radar Sensor. I used it with the following components, using Meshtastic: Core: RAK4631 Base Board: RAK19007 Radar Sensor: RAK12013 To mount the board you can use the bigger…
Inspired by this guide for Meshtastic , this model , and the modifications noted in this guide , I created a mount for attaching a Harbor Breeze solar mesh node to a tree, with provisions for holding a right angle SMA connector and…
The Tracker Case for the WisBlock 19007 Rak 4631 is a full featured case providing space for three 18650s resulting in a longer battery life, as well as a dedicated space for the BLE antenna and the Wisblock GPS module (RAK12500) making…
This plate replaces the stock back cover on the Menards 2 for $8 Solar LED Lights, and allows mounting of a wisblock inside, and has two channels for zip ties through the back. The back plate reuses the stock screws. These lights are 2/$8…
This is a reacreation of the RAK Wireless 19007 Wisblock base board. It contains the overall dimensions of the board and it's required clearances, to help you create an enclosure with correctly spaced mounting holes and inner dimensions…
This mount was remixed to fit in Vladimir Varzaru's 10 inch rack 1U 3xRPI mount using nano's RAK19007 WisBlock Base Board Mount to mount a WisBlock RAK19007 board in a 10 inch server rack.
This RAK19007 WisBlock case is designed to be super rugged and printed in ABS to withstand higher temperatures. Recommendations: Use 4 walls and 15% infill for all Top and Bottom Plates - Use supports Insert - Use supports Shell - Use…
Case for Wisblock Meshtastic module with IR sensor attached by wire. IR Sensor: EKMC1601112 (Panasonic, PIR MOTION SENSOR “PaPIRs”) WisBlock Meshtastic Starter Kit Battery, 800 mAh (4,5 x 33 x 50 mm, CELLEVIA BATTERIES LP453350) 10 x 3 mm…
This is a window mountable, solar recharging unit for the Wisblock Meshtastic radio. It uses 4 suction cups to mount to the window with no holes, and holds a 5 watt solar panel to keep everything topped up. All parts should be printed in…
Bender's bigger, badder brother is here! Meet Flexo, the most flexible Meshtastic powered node "case kit" available… and its FREE to print! Check out the intro video HERE and the teardown video HERE . ***ASSEMBLY VIDEO NOW LIVE CLICK…
Sloped spacers to align an N mount on the RAK Wireless Wisblock solar enclosure. See screenshots for instructions. The one that goes inside is slightly different from the one that goes on the outside.
I really liked the Carlon Meshtastic Mounting Board but could only get a similar 4x4x2 Cantex enclosure at my local HomeDepot. The dimensions are slightly different so recreated a similar design with some customizations. This mounting…
This is a modular case for the RAK WisBlock Starter Kit with the 19007 baseboard. The idea behind this project was to make a simple-to-assemble and customizable case and also eliminate screws, washers and fasteners other than those that…
Used with waterproof junction box containing 5mm grid . Holes: Sized for M3 bolts (30mm x 30mm spacing or "6, grid squares") Stand-offs: Sized for M2.5 threaded insert. Depth is 5mm. RAK19007 comes with M2.5 hardware for mounting
I designed this node around a 4200mah battery. The battery spot is 85x40x8. There is a 20x36x10 open spot in the node that can house GPS antenna. I have not tried installing GPS. Let us know and show pics. Battery thickness can be no more…
Just a very simple basic case for the RAK Wisblock and the RAK Radar Sensor. I used it with the following components, using Meshtastic: Core: RAK4631 Base Board: RAK19007 Radar Sensor: RAK12013 To mount the board you can use the bigger…
A simple Multibin insert for holding three RAK Wisblock 19007 boards when doing firmware updates, etc. The three boards are stacked height-wise so that the battery and solar panel connectors are not obscured by the board in front, and the…
I wanted a small weatherproof box for the Meshtastic RAK Wisblock Mini. I was looking for solar panel charging and 18650 protected cells. My application was for either pipe mounting or tree / telephone pole mounting. I want to use these…
Meshtastic Radio Case for WisBlock Base Board (RAK19007) This is a custom-designed Meshtastic radio case specifically made for the RAK19007 base board and RAK4631 core combo RAKwireless WisBlock Meshtastic Starter Kit US915 SKU 116016 –…
This 3D printable case is designed for the WisBlock Base Board (RAK5005-O) and is fully compatible with both Gen 1 and Gen 2 . ✅ Features: Mounts with 4 standard screws included with the board Cutouts for USB, LED indicators, and SMA…
Inspired by this guide for Meshtastic , this model , and the modifications noted in this guide , I created a mount for attaching a Harbor Breeze solar mesh node to a tree, with provisions for holding a right angle SMA connector and…
Build a door open counter and alarm sensor with WisBlock Reed relays are often used for contactless switching in many applications. The reed relay is normally open, but when a magnet is getting close to it, the relay contacts will close.…
Indoor Air Quality Sensor Enclosure for WisBlock Modular Sensors This enclosure can host a RAK19007 WisBlock Base Board, a RAK14000 EPD display, either a RAK12047 VOC (volatile organic component) and a RAK1901 temperature and humidity…
Simple indoor air quality sensor enclosure Build a WisBlock based indoor air quality sensor and use this enclosure to place it in your house. Based on RAK19007 WisBlock Base Board and RAK4631 WisBlock Core Module , the enclosure supports…
⚠ Still testing. Waiting for the next heavy rain! This enclosure is a concept for outdoor usage. The enclosure is not using any gaskets, it is inspired by the Takachi OB enclosure series. It is “rain-proof” if mounted in the correct…
I sell this case on Etsy and Ebay so please dont sell my design. Rak WisBlock Meshtastic node case 2000mah battery. Basic case hole to access reset button. No room for GPS or sensors. Its a tight fit but it all goes in there. Chip rests…
Want a large wall clock that is easy to read? This enclosure is for a 16x16 matrix LED wall clock. Built with the WisBlock RAK3312 Core Module (Espressif ESP32-S3) and the WisBlock RAK14012 LED Matrix Module. The firmware can be found in…
Stackable mounting plates for the RAK WisBlock and a 3000mAh battery. Printed in PLA+ with M3 x 20 bolts and nuts used to secure together. Parts shown in images RAKwireless WisBlock Meshtastic Starter Kit -…
Indoor Air Quality Sensor Enclosure for WisBlock Modular Sensors Version 2: improved printing easier assembly access to reset button added stand for use on desk or shell This enclosure can host a RAK19007 WisBlock Base Board, a RAK14000…
Outdoor enclosure for WisBlock Modular System with Solar Panel, WisMesh Repeater Mini This enclosure is based on the RAK WisBlock Outdoor concept wide enclosure . The enclosure is not using any gaskets, it is inspired by the Takachi OB…
Wisblock Unify case mounting ears. I've attached the referenced roundedcube.scad file from https://gist.github.com/groovenectar/92174cb1c98c1089347e - I am not the original author.
A simple case to keep your RAK WisBlock safe and secure.
This enclosure is an(other) outdoor enclosure for WisBlock. The enclosure is not using any gaskets, it is inspired by the Takachi OB enclosure series. It is “rain-proof” if mounted in the correct orientation. This means, there is no IPxx…
RAKwireless WisBlock Meshtastic Starter Kit Mount Fits model linked below: https://www.amazon.com/dp/B0CHKZJK9C?ref_=ppx_hzsearch_conn_dt_b_fed_asin_title_1&th=1
A small enclosure for an ultra sonic based sensor using the WisBlock Modular System. With two screw openings to fix the enclosure on a wall. Measures distance to the closest object in the field of view and sends the measured distance over…
Those tiny IPX connectors on RAK 19007/4631 meshtastic devices can pop loose if you wiggle the antenna wire the wrong way, so I made this little tray to put the WisBlock in, with a top that goes over the antenna connector to keep it…
The Tracker Case for the WisBlock 19007 Rak 4631 is a full featured case providing space for three 18650s resulting in a longer battery life, as well as a dedicated space for the BLE antenna and the Wisblock GPS module (RAK12500) making…
About This is a case for a RAK19003 baseboard and a RAK4630. Designed to be water resistant with minimal openings and a screw in lid with a TPU gasket (actual waterproofness may vary). Powered by an 18650 battery. RAK19007 should fit as…
There are lots of great guides and 3D models to help you convert a Harbor Breeze solar light ( https://www.lowes.com/pd/Harbor-Breeze-1-Watt-Black/5015598033 ) into a Meshtastic Node. If you are doing this with a RAK WisBlock system, this…
Made as a portable case for the RAK Wisblock 1 Watt starter kit. This case will accommodate a Very large battery 10000mah or 15000mah (60mm x 110mm x 10mm). This design incorporates a standard 128x64 OLED screen, standard micro toggle for…
Squeeze a Pi Zero 2W into the center of a WisMesh Pocket v2 all-in-one Meshtastic handheld! For power, I tapped the third leg of the power switch and a GND pin on the radio to connect the Battery IN pins on a MH-CD42. This will step up…
This plate replaces the stock back cover on the Menards 2 for $8 Solar LED Lights, and allows mounting of a wisblock inside, and has two channels for zip ties through the back. The back plate reuses the stock screws. These lights are 2/$8…
After I found the Simple Print Monitor - ST7789 1.54" display case designed by @Keralots and his application for the ESP32 to display the current print status I immediately wanted to use this with our RAKwireless WisBlock modular system ,…
After I found the Simple Print Monitor - ST7789 1.54" display case designed by @Keralots and his application for the ESP32 to display the current print status I immediately wanted to use this with our RAKwireless WisBlock modular system ,…
Adds flush-mount BNC and SMA (optional) connectors to @stokey3D's design. BOM 1x BNC bulkhead ( amazon.com ) 1x SMA bulkhead ( amazon.com ) 1x 10,000mAh LiPo battery ( amazon.com ) 4x M3x10 (BHCS-preferred) 1x RAK19007 baseboard Designed…
This is a reacreation of the RAK Wireless 19007 Wisblock base board. It contains the overall dimensions of the board and it's required clearances, to help you create an enclosure with correctly spaced mounting holes and inner dimensions…
This mount was remixed to fit in Vladimir Varzaru's 10 inch rack 1U 3xRPI mount using nano's RAK19007 WisBlock Base Board Mount to mount a WisBlock RAK19007 board in a 10 inch server rack.
Added side walls and extended base for 1W booster. printed with no supports. forgot to take photos before installing it. haha
This is a carrier for two solar panels with 180 x 80 mm size. It is compatible with the mounting slots for solar panels of my previously released outdoor enclosures: WisMesh 1W Repeater Outdoor RAKwireless Outdoor Enclosure for WisBlock…
RWE (Rugged WisBlock Enclosure) is a remix of the open-source ruggedized T-Beam enclosure, now for the RAK19007 WisBlock base board with RAK4631 (LoRa) and RAK12500/1910 (GNSS/GPS) modules. This induces a couple important build and…
RAK has a Unify enclosure with screw sites on the back. This tab lets you screw it to a flat surface. I used 12mm M3 allen heads, but perhaps an improvement would be to use flathead screws and modify the holes so the heads are flush.…
This case puts the functionality of a Push To Talk radio, mesh networking and map overlay/Situational Awareness tools in one platform. The use case is for hunting with rifles where there may be more than one group in a single area.…
This is a water resistant enclosure for RAK19007 Wisblock. Its powered by a user removable 18650 battery. This case aims on modularity, the core module where the radio is mounted, is removable and can be mounted on different appliances.…
I added a V4 that has small mounting pads to stick the GPS and Bluetooth antennae in case there are no enclosure walls within reach, or if you just wanted to keep it self contained and compact. meshtastic.org Case and setup inspired by:…
** You can purchase this already printed/assembled from my store by clicking HERE ** Build a complete Mestastic Node with a RAK starter kit and Altoid tin case. Made cutout for OEM Lora antenna that comes with the kit, or left space to…
** You can purchase this already printed/assembled from my store by clicking HERE ** UPDATE: New STL uploaded with threaded posts for the new PCM model from voltaic enclosures UPDATE2: New STL uploaded with GPS location moved to point…
This is for mounting a Wisblock in an enclosure. I designed the hoes to be used with a 2x6mm self tapping screw. https://a.co/d/0PbzKxA
RAK19007 WisBlock Base Board mount with 4mm mounting holes that fits an electronics base board with a 5mm grid spacing.
This RAK19007 WisBlock case is designed to be super rugged and printed in ABS to withstand higher temperatures. Recommendations: Use 4 walls and 15% infill for all Top and Bottom Plates - Use supports Insert - Use supports Shell - Use…
Case for Wisblock Meshtastic module with IR sensor attached by wire. IR Sensor: EKMC1601112 (Panasonic, PIR MOTION SENSOR “PaPIRs”) WisBlock Meshtastic Starter Kit Battery, 800 mAh (4,5 x 33 x 50 mm, CELLEVIA BATTERIES LP453350) 10 x 3 mm…
IMPORTANT: The panels are difficult to source so I don't recommend using this model anymore unless you can find the exact panel. I have a new version in the works with a more reliable supplier. My goal was to create a durable solar…
This is still a work in progress, planning to make versions with dedicated mounting options and higher water resistance. This is an enclosure/case for the rak wisblock 19007 module, a 16340 button top battery, and n-female fitting.…
This is an adapter to use RP-SMA and/or F connectors with the excellent RAK WisBlock case made by @stokey3D_252878, located here: https://www.printables.com/model/9289
