Trace: The Tracker Case for WisBlock 19007 Rak 4631 Module
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Full featured WisBlock 19007 Rak 4631 case. Space for GPS, BLE and 3x 18650s!
- Ocena
- 0 / 5
- Polubienia
- 9
- Wydruki
- 0
- Wyświetlenia
- 570
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Portable Devices
- Licencja
- Standard Digital File License
The Tracker Case for the WisBlock 19007 Rak 4631 is a full featured case providing space for three 18650s resulting in a longer battery life, as well as a dedicated space for the BLE antenna and the Wisblock GPS module (RAK12500) making assembly a breeze. Theres a side port for a charging gland and the batteries are locked into place by the case design.
Charging port: 11.9mm dia.
Antenna port: 16.1mm dia.
GPS slot: 15mm x 15mm
BLE slot: 40.1mm x 7.1mm
Hardware required:
2-4x M2 screws 5+mm in length
4x M3 screws 10+mm in length
TP4056 or equivalent for charging protection
Charging gland
Female to N Type Female antenna adapter (search for superbat on amazon)
Supplies required:
Solder
Spot welder and Nickel Strips (optional, but recommended)
22 Ga. or similar wire
I ran the wires from the charging gland to a 1 amp charging module (tp4056 equivalent) then to the cells. It provides a stable slow-medium speed charge, and protects the cells from over-(dis)charging.
As long as your tolerances are somewhat good on your printer, these dimensions should provide a nice snug fit for all accessories inside.