Trace: The Tracker Case for WisBlock 19007 Rak 4631 Module
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Full featured WisBlock 19007 Rak 4631 case. Space for GPS, BLE and 3x 18650s!
- Rating
- 0 / 5
- Likes
- 9
- Makes
- 0
- Views
- 570
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Portable Devices
- License
- Standard Digital File License
The Tracker Case for the WisBlock 19007 Rak 4631 is a full featured case providing space for three 18650s resulting in a longer battery life, as well as a dedicated space for the BLE antenna and the Wisblock GPS module (RAK12500) making assembly a breeze. Theres a side port for a charging gland and the batteries are locked into place by the case design.
Charging port: 11.9mm dia.
Antenna port: 16.1mm dia.
GPS slot: 15mm x 15mm
BLE slot: 40.1mm x 7.1mm
Hardware required:
2-4x M2 screws 5+mm in length
4x M3 screws 10+mm in length
TP4056 or equivalent for charging protection
Charging gland
Female to N Type Female antenna adapter (search for superbat on amazon)
Supplies required:
Solder
Spot welder and Nickel Strips (optional, but recommended)
22 Ga. or similar wire
I ran the wires from the charging gland to a 1 amp charging module (tp4056 equivalent) then to the cells. It provides a stable slow-medium speed charge, and protects the cells from over-(dis)charging.
As long as your tolerances are somewhat good on your printer, these dimensions should provide a nice snug fit for all accessories inside.