1 / 7

Starlink Standard 4 Dish Mount - CCD v-16

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

@JC_650_MT

Starlink Standard 4 Dish Mount - CCD v-16 For flat roof.

Ocena: 0 / 5
Polubienia: 6
Pobrania: 27
Wydruki: 0
Wyświetlenia: 236
Oceny: 0

Aktualizacja u źródła: 28 maj 2026

Informacje o modelu

Źródło: Printables
Kategoria: Other Gadgets
Licencja: Creative Commons — Attribution — Noncommercial — Share Alike

Szczegóły Pliki (2)Wydruki i komentarze (Wydruki: 0) (Komentarze: 0)Remiksy (0)Kolekcje (6)

Starlink Standard 4 Dish Mount - CCD v-16 (Case CAD Design version-16)

For flat roof.

It will be mounted on my Chicken Coup roof facing North. It is a flat roof angled up at about 16 deg.

My roof is currently OSB plywood. I will paint it with some rubber sealer, let it dry, then mount the Starlink dish.

This could also be used on an RV / Trailer as a flat mount.

This is my own design. I downloaded the free CAD model from Starlink website. I then built my mount around it.

https://starlink.com/specifications

Here is my mount in CAD. I used Plasticity Software.

https://www.plasticity.xyz/

I even designed in RTV grooves for the mount to rest on the underside and top. RTV groove on the topside is for the backside of the dish to have something nice and soft to rest on. The top circular RTV groove is for the SS Fender washer to seal against.

I also provided two weep holes on the bottom (Lower Left and Lower Right) mounts. That way any water accumulating and run off.