Water spreader 2 - Modular rotating hydroponics tower
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Make the water drip away from the feed hose into the dispenser v7 spreader version 2
- Ocena
- 0 / 5
- Polubienia
- 4
- Pobrania
- 13
- Wydruki
- 0
- Wyświetlenia
- 124
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Outdoor & Garden
- Licencja
- Creative Commons — Attribution — Noncommercial
An improved adapter for the feed hose of the hydroponics tower. This is the old one.
Whith a rotating tower the feed hose must be free from the tower segments. With nothng to spread the water the water will run down the side of the hose. Plants not happy....
This adapter makes sure the water is not clinging to the hose. But it is spread into the little moat in the dispenser module. This second model forced the water to drip more. This causes a ripple in the moat. This ripple makes sure the water runs in all 5 slots.
Fits a generic 16mm gardenhose, for the rotating hydroponics tower funnel.