1 / 1
Nest Thermostat Decorative Wall Plate — Hides Paint Ring, Learning Thermostat 3rd Gen, Parametric — zdjęcie 1

Nest Thermostat Decorative Wall Plate — Hides Paint Ring, Learning Thermostat 3rd Gen, Parametric

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

Covers the paint ring left by old thermostats. Fits Nest Learning Thermostat 3rd gen. No supports. Parametric OpenSCAD.

Ocena
0 / 5
Polubienia
0
Pobrania
7
Wydruki
0
Wyświetlenia
43
Oceny
0

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Licencja
Creative Commons — Attribution

When you upgrade to a Nest Learning Thermostat, the old thermostat often leaves a discolored paint outline on the wall. This 3D-printable decorative wall plate covers it cleanly and frames your Nest with a minimal, finished look — no painting required.

Print it in white to blend with most walls, or match your trim color exactly.

Included files:

  • nest-thermostat-wall-plate.stl — ready to slice

  • nest-thermostat-wall-plate.scad — parametric source, adjust outer size if your paint outline is larger

  • print-guide.txt — settings, tolerance notes, installation steps

Dimensions:

  • 6.0" × 6.0" (152 × 152mm)

  • 3.0mm thick

  • Center circular cutout: 88mm diameter (clears Nest 3rd gen base)

  • Mounting: uses Nest’s existing sub-base screws — no extra hardware needed

Print settings:

  • Layer height: 0.2mm

  • Perimeters: 4

  • Infill: 15%

  • Supports: none

  • Orientation: flat face down

Compatible with: Nest Learning Thermostat 3rd generation.

Note: This is a decorative cosmetic plate. It does not affect thermostat function, wiring, or HVAC operation.

Grab the matching switch and outlet covers from my profile for a coordinated room.

Tagi