Nest Thermostat Decorative Wall Plate — Hides Paint Ring, Learning Thermostat 3rd Gen, Parametric
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Covers the paint ring left by old thermostats. Fits Nest Learning Thermostat 3rd gen. No supports. Parametric OpenSCAD.
- Rating
- 0 / 5
- Likes
- 0
- Downloads
- 7
- Makes
- 0
- Views
- 43
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Other House Equipment
- License
- Creative Commons — Attribution
When you upgrade to a Nest Learning Thermostat, the old thermostat often leaves a discolored paint outline on the wall. This 3D-printable decorative wall plate covers it cleanly and frames your Nest with a minimal, finished look — no painting required.
Print it in white to blend with most walls, or match your trim color exactly.
Included files:
nest-thermostat-wall-plate.stl — ready to slice
nest-thermostat-wall-plate.scad — parametric source, adjust outer size if your paint outline is larger
print-guide.txt — settings, tolerance notes, installation steps
Dimensions:
6.0" × 6.0" (152 × 152mm)
3.0mm thick
Center circular cutout: 88mm diameter (clears Nest 3rd gen base)
Mounting: uses Nest’s existing sub-base screws — no extra hardware needed
Print settings:
Layer height: 0.2mm
Perimeters: 4
Infill: 15%
Supports: none
Orientation: flat face down
Compatible with: Nest Learning Thermostat 3rd generation.
Note: This is a decorative cosmetic plate. It does not affect thermostat function, wiring, or HVAC operation.
Grab the matching switch and outlet covers from my profile for a coordinated room.
