Decorative Lamp
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Decorative Lamp designed to be used with IKEA Kapplake LED
- Ocena
- 0 / 5
- Polubienia
- 14
- Pobrania
- 42
- Wydruki
- 0
- Wyświetlenia
- 203
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Home Decor
- Licencja
- Creative Commons — Attribution — Noncommercial
This decorative Lamp is designed to be used with the IKEA Kapplake LED light.
Read the PDF instructions carefully! I achieved the best results with the slicer settings explained in the PDF. When sending the G-Code to the printer, an error message appeared on the printer display (MK4) notifying that the loaded filament doesn't match the filament loaded in the printer. This not being the case, I just proceeded and everything worked fine. The method described in the PDF instructions was created with the best of my knowledge, which doen't mean there are better or easier methods. If someone has a better solution, feel free to leave a comment!
Among the files is the Lamp_Body in STEP Format. I wasn't able to slice the STEP file. However, I had no problems slicing the STL file, so you can try for yourself.
Happy printing!