1 / 1
The Legend of Zelda Links Awakening DX Title Screen
Zamów wydruk tego modelu
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
This is the title card from the Legend of Zelda Links Awakening DX. The model is (L x W x H) 144mm x 160mm x 7mm and…
- Ocena
- 0 / 5
- Polubienia
- 11
- Pobrania
- 43
- Wydruki
- 0
- Wyświetlenia
- 414
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other Ideas
- Licencja
- Creative Commons — Attribution
SzczegółyPliki (2)Wydruki i komentarze (Wydruki: 0) (Komentarze: 0)Remiksy (0)Kolekcje (13)Powiązane
This is the title card from the Legend of Zelda Links Awakening DX.
The model is (L x W x H) 144mm x 160mm x 7mm and each layer is 1mm so if you have a 0.4mm nozzle it can be scaled down to 40% of it's original size keep in mind that you may lose some detail.
Print Settings
Printer:
Hictop Pursia i3
Rafts:
Doesn't Matter
Supports:
No
Resolution:
1mm
Infill:
N/A
Notes:
The model is 1 pixel to 1 mm ratio. Each layer is 1mm tall and it can be as accurate as your printer can be.
Category: 3D Printing