Insert for IKEA FNISS trash bin
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
An small insert to separate paper from other waste
- Ocena
- 0 / 5
- Polubienia
- 0
- Pobrania
- 7
- Wydruki
- 0
- Wyświetlenia
- 25
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Organizers
- Licencja
- Creative Commons — Attribution — Noncommercial
Even though user ul90 already created a perfect model for this exact trash bin that even has a step file where you can tweak every setting yourself I wanted to create one as a teachable moment with my daughter.
I uploaded 2 versions, one with a wider lip on top (see file name 12 mm and 5 mm) since I didn't trust my measurements and wanted to be on the safe side, 5 mm should be a nice fit though.
It seems my trash bin is older than the one on the German Ikea website now which seems to have a thicker lip on top. Maybe measure the diameter once to be sure you got the right one - I have 29 cm on top
Fusion360 file also is there if you want to tweak some measurements.
I trusted the bridging and printed without supports, which was a mistake in my case, so maybe use supports to be safe...