Insert for IKEA FNISS trash bin
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
An small insert to separate paper from other waste
- Rating
- 0 / 5
- Likes
- 0
- Downloads
- 7
- Makes
- 0
- Views
- 25
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Organizers
- License
- Creative Commons — Attribution — Noncommercial
Even though user ul90 already created a perfect model for this exact trash bin that even has a step file where you can tweak every setting yourself I wanted to create one as a teachable moment with my daughter.
I uploaded 2 versions, one with a wider lip on top (see file name 12 mm and 5 mm) since I didn't trust my measurements and wanted to be on the safe side, 5 mm should be a nice fit though.
It seems my trash bin is older than the one on the German Ikea website now which seems to have a thicker lip on top. Maybe measure the diameter once to be sure you got the right one - I have 29 cm on top
Fusion360 file also is there if you want to tweak some measurements.
I trusted the bridging and printed without supports, which was a mistake in my case, so maybe use supports to be safe...