Stem Connector for Stihl Grass Trimmer (Toy)
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
My kid broke the stem connector of his Stihl Grass Trimmer. The toy discontinued, so I created a replcament for it.
- Ocena
- 0 / 5
- Polubienia
- 2
- Pobrania
- 9
- Wydruki
- 0
- Wyświetlenia
- 150
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other Toys & Games
- Licencja
- Creative Commons — Attribution — Noncommercial — NoDerivatives
A replacement handlebar clamp and shaft connector designed for kids' toy grass trimmers / brushcutters (specifically popular Stihl-style toy models).
The original factory plastic clamps on these toys are notorious for wearing out, loosening up, or snapping under heavy play. This robust 3D printable replacement features a two-piece clamp design with locking alignment pins to secure the handlebars firmly to the shaft, preventing any unwanted twisting or sliding.
### Key Features:
- Perfect Fit: Designed to match the exact tube and handlebar geometry of the popular toy trimmer.
- Secure Lock: Features internal alignment pins/slots (as seen in the CAD model) to ensure the shaft and handlebars lock perfectly into position.
### Hardware Needed:
- 4x bolts and nuts to clamp the two main structural halves together.
### Printing Recommendations:
- **Material:** PETG or ABS/ASA is highly recommended for impact resistance and durability during active play. PLA can work, but might crack if the toy is dropped or heavily stressed.
- Perimeters/Walls: 4-6 walls for maximum structural strength around the bolt holes.
- Infill: 40-50% (Rectilinear or Gyroid).
- Supports: The bottom clamp half prints cleanly, but the top section with the overhanging tube sockets may require minimal supports depending on your printer's bridging capabilities.
### Feedback & Community:
I design these parts to bring broken toys back to life! Please share your makes, leave a rating, and provide your constructive criticism in the comments. Let me know if the tolerances fit your specific toy model or if any dimensions need to be tweaked!