E90 E9X Mount for F20 F30 8HP Shifter
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
This is a mount to install an F20 or F30 shifter in an E90 E9X automatic car.
- Ocena
- 0 / 5
- Polubienia
- 2
- Pobrania
- 88
- Wydruki
- 0
- Wyświetlenia
- 632
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Automotive
- Licencja
- Creative Commons — Public Domain
This is a mount to put an F20/F30 8HP shifter in an E90 that came with an automatic. It is intended to re-use the stock rubber gasket from the original shifter.
It needs supports drawn in around the nut retainers on the bottom, I do not recommend doing supports for the entire bottom unless you have a printer that allows for an alternative support material. The 8HP shifter mounts to the bracket with M6 x 70mm bolts with M6 nuts, mounts to car with stock bolts for original shifter. I printed mine in glass filled nylon to hopefully reduce creep and standup to how hot the interior of a car gets.
I modeled after my 2011 335i with stock 6HP shifter, so your mileage may vary. I have no idea how earlier E90s may differ. I am a complete amateur in CAD, but this seems to work fine in my car.