Handle for two double AEG/RIDGID 18V battery holder (Batteries Caddy)
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
I designed this handle to fit two of the double 18V batteries holder by @JAPrintsandCrafts
- Ocena
- 0 / 5
- Polubienia
- 3
- Pobrania
- 29
- Wydruki
- 0
- Wyświetlenia
- 171
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Tools
- Licencja
- Creative Commons — Attribution — Share Alike
This is an add-on for the original model by @JAPrintsandCrafts (thanks for sharing 👍).
It is designed to assemble two of the double 18V RISGID/AEG battery holder. This creates a caddy to handle 4 batteries.
I tested it with 4 x 4Ah batteries and it is holding great.
Print recommendation :
Printed flat on the bed
Printed with PETG
Used 3-4 walls with 0.4 mm nozzle
Used 0.20 mm layer height
Assembly :
Used some small 3 x 16 mm wood screws for assembly
(for bottom holes, 16mm is too long so I had to put screws on outside holes for one side and inside holes for the other side)Do not overtighten screws