Handle for two double AEG/RIDGID 18V battery holder (Batteries Caddy)
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
I designed this handle to fit two of the double 18V batteries holder by @JAPrintsandCrafts
- Rating
- 0 / 5
- Likes
- 3
- Downloads
- 30
- Makes
- 0
- Views
- 177
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Tools
- License
- Creative Commons — Attribution — Share Alike
This is an add-on for the original model by @JAPrintsandCrafts (thanks for sharing 👍).
It is designed to assemble two of the double 18V RISGID/AEG battery holder. This creates a caddy to handle 4 batteries.
I tested it with 4 x 4Ah batteries and it is holding great.
Print recommendation :
Printed flat on the bed
Printed with PETG
Used 3-4 walls with 0.4 mm nozzle
Used 0.20 mm layer height
Assembly :
Used some small 3 x 16 mm wood screws for assembly
(for bottom holes, 16mm is too long so I had to put screws on outside holes for one side and inside holes for the other side)Do not overtighten screws