Shashlik Skewers – Multi-Color Play BBQ Set
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
AMS only and need to be glued
- Ocena
- 0 / 5
- Polubienia
- 4
- Pobrania
- 5
- Wydruki
- 0
- Wyświetlenia
- 45
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other Toys & Games
- Licencja
- Standard Digital File License
Shashlik Skewers – Multi-Color Play BBQ Set
What’s included:
Digital STL files for a multi-color skewer set. Each skewer prints in two shell halves (front/back) so you can run multiple colors at once (meat, onion rings, peppers, etc.). After printing, simply glue the two halves together.
Print Profile (recommended)
Printer/Mode: Multi-color (AMS/MMU) or manual filament swaps
Material: PLA (easy & bright colors) or PETG (tougher)
Nozzle: 0.4 mm
Layer Height: 0.20 mm (quality)
Walls: 2–3
Top/Bottom: 4–5 layers
Infill: 15% Gyroid/Grid
Supports: None
Bed Adhesion: Skirt; Brim (optional for the onion rings)
Orientation: Print the two halves face up (detail side up) for clean color separation
Color tips:
Assign parts per color in your slicer (meat/onion/pepper/skewer). Keep purge volumes reasonable; enable “wipe into infill” if available.
Assembly
Dry-fit both halves; lightly sand mating edges if needed.
Glue the halves together with CA (super glue) or PVA; clamp for a few minutes.
Optional: Seal seam with a tiny bead of glue and wipe.
Safety & Use
Prop / toy parts only – not food-safe and not for real grills.
Small parts: not suitable for children under 3.
Clean with cool water only (no dishwasher).