Shashlik Skewers – Multi-Color Play BBQ Set
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
AMS only and need to be glued
- Rating
- 0 / 5
- Likes
- 4
- Downloads
- 5
- Makes
- 0
- Views
- 45
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Other Toys & Games
- License
- Standard Digital File License
Shashlik Skewers – Multi-Color Play BBQ Set
What’s included:
Digital STL files for a multi-color skewer set. Each skewer prints in two shell halves (front/back) so you can run multiple colors at once (meat, onion rings, peppers, etc.). After printing, simply glue the two halves together.
Print Profile (recommended)
Printer/Mode: Multi-color (AMS/MMU) or manual filament swaps
Material: PLA (easy & bright colors) or PETG (tougher)
Nozzle: 0.4 mm
Layer Height: 0.20 mm (quality)
Walls: 2–3
Top/Bottom: 4–5 layers
Infill: 15% Gyroid/Grid
Supports: None
Bed Adhesion: Skirt; Brim (optional for the onion rings)
Orientation: Print the two halves face up (detail side up) for clean color separation
Color tips:
Assign parts per color in your slicer (meat/onion/pepper/skewer). Keep purge volumes reasonable; enable “wipe into infill” if available.
Assembly
Dry-fit both halves; lightly sand mating edges if needed.
Glue the halves together with CA (super glue) or PVA; clamp for a few minutes.
Optional: Seal seam with a tiny bead of glue and wipe.
Safety & Use
Prop / toy parts only – not food-safe and not for real grills.
Small parts: not suitable for children under 3.
Clean with cool water only (no dishwasher).