1 / 1
Low profile focusser Anders Travel Telescope V3 — zdjęcie 1

Low profile focusser Anders Travel Telescope V3

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

A very low profile fosusser for the Anders Travel Telescope V3

Ocena
0 / 5
Polubienia
0
Pobrania
5
Wydruki
0
Wyświetlenia
31
Oceny
0

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Licencja
Creative Commons — Attribution

A very low profile focusser for the Anders Travel Telescope. 

I made this model to be able to use a DSLR (Canon EOS 550D) with the telescope in the 450mm focal lenght version. 

Focussing is a bit difficult but if you clamp the camera with not too much force you will be able to move the tube pretty precise by rotating the camera slightly at the same time. 

  • Use 4 m3 nuts to slide in the slots and 4 m3 bolts to push on the wedges.

  • The extender is to give the tube from te camera a but more support. You can use some glue but friction might be enough

Depending on your print materiel a file or sandpaper is needed to make it all fit.  

Tagi