Low profile focusser Anders Travel Telescope V3
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
A very low profile fosusser for the Anders Travel Telescope V3
- Rating
- 0 / 5
- Likes
- 0
- Downloads
- 5
- Makes
- 0
- Views
- 31
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Physics & Astronomy
- License
- Creative Commons — Attribution
A very low profile focusser for the Anders Travel Telescope.
I made this model to be able to use a DSLR (Canon EOS 550D) with the telescope in the 450mm focal lenght version.
Focussing is a bit difficult but if you clamp the camera with not too much force you will be able to move the tube pretty precise by rotating the camera slightly at the same time.
Use 4 m3 nuts to slide in the slots and 4 m3 bolts to push on the wedges.
The extender is to give the tube from te camera a but more support. You can use some glue but friction might be enough
Depending on your print materiel a file or sandpaper is needed to make it all fit.