1 / 2
Case for the Digilent Nexys A7 / Nexys 4 FPGA board. — zdjęcie 1
1 / 2

Case for the Digilent Nexys A7 / Nexys 4 FPGA board.

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

Snap fit case for the Digilent Nexys A7 / Nexys 4 FPGA board.

Ocena
0 / 5
Polubienia
1
Pobrania
27
Wydruki
0
Wyświetlenia
80
Oceny
0

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Kategoria
Computers
Licencja
Creative Commons — Public Domain

I designed and printed a bunch of these for my faculty's computer lab, the latest version being the one with ventilation holes and easy access to the JP1 jumper.

I've included some of the other iterations as well, all having the legend for the buttons, LEDs and switches done in the 3mf file.

Printer: Qidi Q2

Relevant settings:

  • Filament: PETG

  • Nozzle Temp: 240C (the fillet looked bad at higher temps)

  • Bed Temp: 70C

  • Layer Height: 0.12 mm (initial layer has to be 0.12 as well)

  • Nozzle diameter: 0.4 mm

  • Wall loops: 5

  • Infill: 15% Gyroid

  • Top/Bottom layers: 5 each

Tagi