1 / 2
Case for the Digilent Nexys A7 / Nexys 4 FPGA board.
Order a print of this model
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Snap fit case for the Digilent Nexys A7 / Nexys 4 FPGA board.
- Rating
- 0 / 5
- Likes
- 1
- Downloads
- 27
- Makes
- 0
- Views
- 84
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Computers
- License
- Creative Commons — Public Domain
I designed and printed a bunch of these for my faculty's computer lab, the latest version being the one with ventilation holes and easy access to the JP1 jumper.
I've included some of the other iterations as well, all having the legend for the buttons, LEDs and switches done in the 3mf file.
Printer: Qidi Q2
Relevant settings:
Filament: PETG
Nozzle Temp: 240C (the fillet looked bad at higher temps)
Bed Temp: 70C
Layer Height: 0.12 mm (initial layer has to be 0.12 as well)
Nozzle diameter: 0.4 mm
Wall loops: 5
Infill: 15% Gyroid
Top/Bottom layers: 5 each
