Carbon Fiber Punch

Summary

I needed a simple tool to help press small magnets into my custom bed scraper and wanted something strong. (Link down below)

Features

• Very simple punch

• Flat sides that can also be used if needed

• No damge to the punch when used to press small magnets into another tool

Example Print

• Material: Polymaker Fiberon PA612-CF15

• Hard Nozzle: 0.4mm @ 290°C

• Bed: Prusa PA Nylon Sheet @ 110°C

• Chamber Temp: 50°C

• Layer Height: 0.2mm

• Max Volumetric Speed/Flow: 8mm³/s

• Infill: Default 20% Cubic

• Brim/Skirt: 5mm outward

• Supports: Snug, Just to help with bed adhesion and prevent the part from tipping over.

Notes: After printing, I lightly sanded the punch, as raw PA612 CF can have a rough, abrasive texture straight off the printer. I also applied brief, direct heat to both ends using a torch as a form of heat treatment. I do not have any evidence that the heat treat worked but it makes me feel "better" anyway.

Thank You

Thank you for taking the time to visit my page. If you enjoy my design and prints, please consider liking, downloading, and saving to your favorites. Constructive feedback is always welcome, it's the best way for me to continue improving!

Bed Scraper

 Products

• CoreOne+

• CoreOne+ Ultimate

• MK4

• Polymaker Fiberon PA612-CF15

• Polymaker PolyDryer Box

Disclaimer:

• Links may take you to Amazon or Prusa.com for products I endorse and use on a regular basis.

• JD3D is not responsible for any damage or harm caused by improper production, assembly and use