Carbon Fiber Punch
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
This is a punch made of PA612 CF
- Rating
- 0 / 5
- Likes
- 2
- Downloads
- 4
- Makes
- 0
- Views
- 41
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Tools
- License
- Creative Commons — Attribution — Noncommercial — Share Alike
Summary
I needed a simple tool to help press small magnets into my custom bed scraper and wanted something strong. (Link down below)
Features
Very simple punch
Flat sides that can also be used if needed
No damge to the punch when used to press small magnets into another tool
Example Print
Material: Polymaker Fiberon PA612-CF15
Hard Nozzle: 0.4mm @ 290°C
Bed: Prusa PA Nylon Sheet @ 110°C
Chamber Temp: 50°C
Layer Height: 0.2mm
Max Volumetric Speed/Flow: 8mm³/s
Infill: Default 20% Cubic
Brim/Skirt: 5mm outward
Supports: Snug, Just to help with bed adhesion and prevent the part from tipping over.
Notes: After printing, I lightly sanded the punch, as raw PA612 CF can have a rough, abrasive texture straight off the printer. I also applied brief, direct heat to both ends using a torch as a form of heat treatment. I do not have any evidence that the heat treat worked but it makes me feel "better" anyway.
Thank You
Thank you for taking the time to visit my page. If you enjoy my design and prints, please consider liking, downloading, and saving to your favorites. Constructive feedback is always welcome, it's the best way for me to continue improving!
Bed Scraper
Products
Disclaimer:
Links may take you to Amazon or Prusa.com for products I endorse and use on a regular basis.
JD3D is not responsible for any damage or harm caused by improper production, assembly and use