SK150S housing for Makita
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
The best housing for this PSU
- Ocena
- 0 / 5
- Polubienia
- 1
- Pobrania
- 10
- Wydruki
- 0
- Wyświetlenia
- 106
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Electronics
- Licencja
- Creative Commons — Attribution
I needed adjustable psu for makita battery, didn't like any of the models here, so I made my own.
I used SK150S from aliexpress, I like it because it has step down and boost option and plenty of amperage.
I designed the housing so that it can be powered through Makita battery by default but I can also switch off the battery with KCD1 switch and I can power it up from side XT60 switch, which would be useful for any longterm applications that would otherwise drain my battery.
I use additional 30mm fan for cooling.
I used makita battery mount from aliexpress, which screws into my printed housing, its much better than printing mount myself.
Wiring is easier with soft silicone.
BOM:
1x KCD1-6-201 switch
1x SK150S
1x30mm FAN
2x XT60 PLUG
1x DC PLUG 55x21
2x BANANA PLUG SOCKETS FOR MULTIMETER CABLES
1x MAKITA BATTERY MOUNT FROM ALIEXPRESS
1x 5*20mm FUSE HOLDER